I could use 3 sticks of 1.75x.120 HREW or DOM for my exo, and body got some they want to part with? Or a cheap hook up?
Printable View
I could use 3 sticks of 1.75x.120 HREW or DOM for my exo, and body got some they want to part with? Or a cheap hook up?
I can get you some dom for $3 a foot
how long? 20' joints?
thats how they come
Quote:
Originally Posted by AggieTJ2007
i call B.S.
is this like the $200 front 60's you were supposed to pick up for us?
if not, ill take 4.
Well I have plenty of scrap 1 3/4" tubing, that has been cut up and is like 6', 10' and anything in btw, but if he only wants 20' joints that have never been touched, then i will just keep to myself.
I am amazed at how cheap everyone in this club is (including me) yet you expect brand new metal? Ah poo on that.
I could use some of those 10' pieces
incorrect where i buy hrew or dom through my guy it either comes in 24ft,22ft,21ft, or 20ft. the stuff for my steering came in 24 ft joint from the factory.Quote:
Originally Posted by AggieTJ2007
also 3 dollars a foot is not bull**** thats what i paid for the same dom about a month and a half ago.
I just paid 2.71 a foot through E.m. jorgenson, when u buy tubing u pay for random lenths but only twenty of it
what kinda shape is the scrap in (rust, etc)? And what is it, dom or HREW (it can't be pipe cause it'll mess up the bender) For my original plan, I needed 2 pieces longer than 10 ft, but not by much. I can most likely change plans though to accomadate it. If nothing else I may grab 2 sticks from creighton and some scrap from you.Quote:
Originally Posted by FJAggie07
who all needs tubing. Perhaps if we can get several people together we can get enough to get a break in price
well I have to go to Austin to get it and right now I think we are getting around 200ft
what are you gonna do with that much? I may go in for 5 sticks since I got a feeling the runner is gonna be a jungle gym by the end of christmas
When ya gonna get some, I wouldn't mind gettin in on a group buy for this.
I'd like to get it before thanksgiving for sure, that way if I have the time I can start working on a exo. I want to armor this thing as soon as possible to avoid a repeat of the last truck
If somebody doesnt mind storing it for me till December, I would be in for 200' myself.
hey creighton, can you get other sizes? I need about half a stick to build my steering out of. The heavier the wall the better
I'm going to need ~40' for the sliders and another ~40 for bumpers and various projects.
let me see what I can get, I will look into some more but right now ive got
ED 200'
Feller 100'
Garrett 80'
Me 200'
John 100'
Total 680'
figure in extra for **** ups, cause it always happensQuote:
Originally Posted by JeepPhisherman
Quote:
Originally Posted by AggieTJ2007
4x20 = 80
ok fixed it
eh, better make it 100'
I'd like some 1.25 x whatever wall... I have a die for it now, so why not have some tube :gigem:
ok
Price check on 2" .100 wall.
Let me know what you find out Creighton. If you can take anymore order's I might need some.
ok here are prices as delivered to CS by me to your door
1.75x.120 DOM $3.05
1.25x.120 DOM $4.00
1.75x.120 4130 $5.05
1.75x.095 4130 $5.05
Lenghts for the Chromoly must be over 200ft or add .50-.75
Also what was that thickness for the steerig stuff, I might buy 40-60ft of that stuff too.
Everyone let me know what they want and I will get started on the order. I am going to have to take paypal from yall and then pick the tube up on monday. I should also be able to get the tube delivered on monday as well.
Why is 1-3/4 cheaper than 1-1/4?
Because I only got a quote for 40ft vs 700ft
larger demand = easier to come by most likely. As for steering, I would say .25 wall or thicker. 1.5x.25 would probally be good since you can get 3/4-16 (heim) and 7/8-18 (1 ton TRE) weld in bungs with a 1 inch OD just about anywhere
when i got my 1.5 in with .25 wall it for my steering it was like 6 dollars a foot. to give some of you all a decent idea on price.
hmm, looks like i'll have some nerf-bar-esque sliders if i go that route. when do you need money?Quote:
Originally Posted by AggieTJ2007
can you get the 1.25 in HREW?
what are you planning on doing with the 1.25 Doug?
garrett, do you have enough room to store this in your garage? This stuff rusts fast if left out. Remember you can lay it under a rig if need be.
Creighton, I'm in for a 100 ft. Just let me know when you need the money. I'm thinking its time for a bending party
Who knows? I was just going to get 40ft of it for whatever. Probably not at that price though. Probably make good grab handles, misc. mounts, dash, etc...Quote:
Originally Posted by CRaSHnBuRN
It fits in my garage.
What about my 2" .100 and .120 wall creighton?
if ya need help getting it, let me know
Quote:
Originally Posted by CRaSHnBuRN
yea, im not sure on my garage dimensions, but if it wont fit lengthwise, ill just throw it up in the above the garage