How do you keep the sandpaper from sticking when wet sanding? Put it on a block or use soap in the water?
Type: Posts; User: TdmayfieldIV
How do you keep the sandpaper from sticking when wet sanding? Put it on a block or use soap in the water?
There are probably more inconsistencies on the parts store water pump than on the block......that being said, smear a thin layer on both sides of the gasket.
the carrier bearing shims on a sterling are external and a huge pain in the ass. Just make sure you mark which side the carrier shims go on before you take them out, when you pry the carrier out...
We use self tapping screws for everything. If they made one big enough I would replace my head bolts with them. I agree.
I think I found the problem. What was with this guy using scotch locks for ****ing everything. Ed is better at wiring than this guy........:flipoff2:
Having trailer brake controller issues. Tekonsha brake controller. When the trailer is hooked up, the green light come on indicating it has a good circuit. When is squeeze the button it turns from...
take some scrap pieces of bent tube from the shop and tack them to the table. use the big c clamps to hold the top in place. Heat with torch and bend
It's not super high pressure either. You can just use barbs and hose clamps
Jic is cheaper and Napa has the fittings in stock. The only problem is rheyre not red and blue.
Parents car, 2003 Yukon XL Denali, 6.slow
Both front seat heaters and all power to the driver's seat don't work. Fuses are fine........
Heard that the body control module has to be reflashed? ...
Hf work lights. The housing is rubber and the lenses are really thick. $12 ea too.
Have you looked for leaks on the rack?
Red to red black to black....done
What type of fluid do I run with hydro assist?
Some people say tranny fluid, but then some say it breaks down the seals.
Detergent or non detergent?
Anti wear or not?
Weight? Multiweight...
I'm buying Scotts psc ram
So I need a ram for hydro assist.
I know the norm is 8" stroke, but how do you match the speed of the ram with the speed of the steering box? If the ram is slower than the steering box will you...
Yuppie......is rtv not good enough for you?
Massive vacuum leak. Apparently ford used a different base on some of the 2bbls that won't fit on a normal 2bbl adapter.
Put a rebuild kit on a motorcraft 2bbl and Summit hei distributor in my bronco. Will start up and high idle for about 3 seconds then stumble and die. I cleaned out every fluid passage with brake...
No, call them
No matter what I do you will tell me its going to the scrap yard.
Not trying to be a dick, but you're crazy if you think that will last for any amount of time. Seriously, just fix it right the first time, I don't know how many wiring **** ups I have had to fix...
It's designed to fail immediately obviously:flipoff2:
Ok John from car doc and Chet told me this:
Turn the key on and bump the starter (not enough to where it will start)
Leave the key in the on position
Let the light blink, the computer is...
What you think your home made circuit will be reliable? Car doc has a tech II