Search:

Yes I am. Know of one?

The jeep is sold. It goes to it's new home in Royse City tomorrow.

Buy a street legal camping rig. I would trade for a 4x4 Cherokee, Grand Cherokee, Land Cruiser, Tacoma, or the like.

The Jeep is back up for sale and I'm pretty serious about it this time.

New price of $9,999.

Let me know if you know anyone who is interested.

For a little while.

It started right back up once upright.

Wheeled in Bridgeport on Saturday. Got a bit tippy at one point.

http://i406.photobucket.com/albums/pp144/rkblankenship/IMG_2610_zps66wuapxs.jpg
...

I think it was these guys......http://moab-4x4.com/.......but it looks like their web-store is down.

Two of the four bolts use the stock mounting locations for the battery tray which have a reinforcement plate on the inside of the firewall. The other two bolts I welded fender washers to the engine...

I've never been happy with the stock battery tray. It was bulky, ugly, and required a bungee cord to keep the battery in place. I replaced it with a generic 11" racing tray from A&M Manufacturing. I...

Thanks. :gigem:



Yes, http://www.swagoffroad.com/8-Gallon-Rubber-Maid-Action-Packer-Baja-Bins_p_35.html

There are (8) 1/4" bolts that hold the action packer mount to the floor. I am going to...

I rearranged the back of the jeep. Artec quart crate, swag offroad action packer mount. I need to find a cooler to mount next to the quart crate. Everything is now easy to access and secured in case ...

Here is an earlier pic that shows a comparison.

http://www.tamor.org/forums/showthread.php?8688-Roxanne-1985-Cj-7&p=300795&viewfull=1#post300795

I suspect it is so you can bottom out the stud threads on the knuckle to tighten it down.

http://i406.photobucket.com/albums/pp144/rkblankenship/20150207_172701_zpsaikcf6lf.jpg

Cracked the can on the PS pump in Clayton (which was the reason for the whining pump/vomiting fluid). Cracked at the upper fitting. PSC rebuilt the pump and replaced the can and are shipping it back...

Found a good deal on some new rollers for the jeep. It'll hold down the driveway nicely.

17 inch raceline beadlocks and 39.5x13x17 iroks.

Also mounted a new set of 14inch bilstein 5125 for the...

Crushed the tail lights in clayton. 4.5inch hole saw and some cheap amazon leds and we're back in business.

http://i406.photobucket.com/albums/pp144/rkblankenship/20150126_175558_zpswgqqdgv4.jpg

The jeep was looking a little run down. A few coats of Rustoleum hammered black and some black vinyl spray paint and we're looking good again.


...

I sheared a 9/16" ARP stud off the drivers side d-44 high steer arm/knuckle. I must have put it in a bind and hydro assist took care of the rest. ...

http://www.lsjc.org/board/showthread.php?70465-1985-CJ-7-with-Ford-V-8-built-axles-37-s-and-lots-of-custom-touches&p=780225#post780225

That is the "I'm not sure I want to sell, but money talks"...

1985 CJ-7 Build Sheet
General Specs:
-Titled 1985 CJ-7 with Ford V-8, built axles, 37”s and lots of custom touches
-Slightly modified original CJ-7 body (tried to keep the classic Jeep look)...

Shoot me a number. I have an idea of what I think is realistic but I also want to gauge the market. . . although maybe not the Colman market.

Does anyone have any interest in purchasing the Jeep from me? I'm thinking it over. Send me a PM if you are interested. Thanks.

Yes. I've been running one since 2010 and have liked it. (1994 yj booster, 1968 corvette master cylinder, willwood adjustable proportioning valve, chevy 3/4ton calipers front and rear). My old master...

Winch rope and aluminum fairlead.
http://i406.photobucket.com/albums/pp144/rkblankenship/20131017_204600_zps7b0774f3.jpg

New rear axle tie down points....