Random Tech Questions

[jerryg79]

My dad and one of my brother's have them. F-450 and F-350 duallies with 4.88 gears. More power and quieter than the 6.0.

thanks. Mileage, reliability,etc?

[eight]

I think they get 14.5 on the highway. Keep in mind these are 9-10K lb trucks. This is in line with the 7.3s, the 6.0s got a little better mileage. They've only had them a couple months. My uncles have 4-5 of them and I think they've been reliable. My safety man at work has a single wheel F-350 4x4 and it gets 17-18 mpg, it's computer died a couple weeks after he got it.

[DRAGOONRANCH]

mom just picked up an 08 4door longbed. said the display reads an average of 14 on it. I told her to run a couple of tanks through it and write it down and see what it says then.

[uglyota]

Well it looks like the only casualties are brake caliper slider bolts and a little aluminum turned off the inside of my rim (and the unit bearing, of course). In the backyard and torn back down. Again.

[agjohn02]

Well it looks like the only casualties are brake caliper slider bolts and a little aluminum turned off the inside of my rim (and the unit bearing, of course). In the backyard and torn back down. Again.

[uglyota]

suck macaque

[Eckert]

i laughed.

[DRAGOONRANCH]

I am glad to see you two getting along so well now.

[Eckert]

lets talk about ****ty chain driven t-cases...

from what i can tell, 27 spline np231's only came in s10s. I see people on pirate(and other sites) swapping internals from a np241 into a np231. could one take a GM np241 and install the input/planetary into a jeep/dodge np231 housing to achieve a 27 spline np231 with a 6 bolt face?

objective is to make a 27 spline crawl box to put between a th350/700r4 and d300.

[JB]

suck macaque

hahahahahahah

[JB]

ya, he's over by soggy bottom off 21. john brown.

Colman house should have it.

[Sharpe]

lets talk about ****ty chain driven t-cases...

from what i can tell, 27 spline np231's only came in s10s. I see people on pirate(and other sites) swapping internals from a np241 into a np231. could one take a GM np241 and install the input/planetary into a jeep/dodge np231 housing to achieve a 27 spline np231 with a 6 bolt face?

objective is to make a 27 spline crawl box to put between a th350/700r4 and d300.

I dont know if that will work but I have two 27 spline 241's fer sale

[Eckert]

I dont know if that will work but I have two 27 spline 241's fer sale

i would just go with a 241, but i cant seem to find a 241/d300 kit. aka box 4 rocks.

[eight]

Jones was trying to sell one.

[uglyota]

one of doug's threads has some talk about swapping planetaries between 231s and 241s