Random Tech Questions

[Seth]

Everybody please keep in mind http://tamor.org/forums/showthread.php?t=8207


I'm not going to edit posts unless they are explicit, however I will start the banning procedure if this keeps up.

??

[73bronco]

The injectors are $70 each (x8) so I would like to avoid buying new ones if possible.

Pull them out and soak them in injector cleaner overnight. Use a 9v battery to actuate the injector and blow some compressed air through them. A sonic cleaner would be good too.

[Sharpe]

I have a spare set so I'm thinking about sending them to witchhunter for $18 each, but I'd like to try the easier and (hopefully) cheaper flush first.

[AggieTJ2007]

if you have a spare set then it just turns out that you are too lazy to swap them out

[BroncoJo]

if you have a spare set then it just turns out that you are too lazy to swap them out

I'm going to guess the spare set is in worse or equal shape.

[robertf03]

stuff with big upper plenums aren't the easiest engines to swap injectors

[Sharpe]

if you have a spare set then it just turns out that you are too lazy to swap them out

Yah, no... They are out of a junkyard engine and are in unknown condition. Plus, as Flem said, I have to remove the upper intake plenum to get to them. That plus all the plastic fuel rail faggotry make me not want to **** with it any more than neccesary.

[AggieTJ2007]

I see. I guess you should send your spare injectors out to be cleaned and then swap them so you only have to **** with everything once

[uglyota]

If I were you I would just convert that ho to dual TBI and be done with it

[DRAGOONRANCH]

If I were you I would just convert that ho to dual TBI and be done with it

DAMN, you beat me to it!

[RCcola55]

it would probably start quicker

[agjohn02]

I say you get rid of it and use your student loan money to make payments on a new truck.

[Sharpe]

Anyone know what the fitting size on a Wix 33481 is? I.E. I am trying to find AN adapters and Jegs has 3 different sizes, but I dont not know which it is and do not have the tools to measure one here.

[TexTJ209]

Look it up on the Wix website, it lists fitting sizes there.

[Sharpe]

Is there anywhere in town I can get a tiny (~3/8 x 3/8 x 1/16") piece of high density plastic? Exact material isnt important, something like Delrin or teflon will probably work.