Texas Custom Coaters did my axles. Good work.
Texas Custom Coaters did my axles. Good work.
92 YJ
04 F-150 4x4
11 F-250 4x4
wheelsOriginally Posted by Sharpe
thanks, thats up there off south college isn't it? there stuff is way expensive
i think thats the one off hwy 6 up north past hwy 21. don't know for sure though.
Last edited by 85cj7; 01-14-2010 at 05:14 PM.
Their.
And here I have your powder coat solution:
blankenship, i think you are thinking of t3 or take 3 or whatever they call themselves
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
So apparently the wheels I picked up today were not 16x8's but 16x7's. Man the guys at Crosby farm and tire are gonna hate mr when they mount up robbies old tires...
Hopefully it is even possible to get them mounted. I know it was a a real pain for me to mount the 15x8's from the frickoneer on the 16 inch wide boogers. If they do fit I won't have to worry about getting beadlocks, and my tires will prolly measure 39.5" now.
Last edited by stx4wheeler; 01-14-2010 at 10:28 PM.
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
I have mounted 38 x 15.5 x 16.5 tires on 16.5 x 5.5 wheels. That part is not hard at all. I may be a little badder dude than most, but me and 2 screwdrivers can make it done. Breaking them off is a little different, maybe Andy could do it.
brians tires were on stock 7 inch chevy steelies for a long time, house of tires had no problems mounting them
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
which is mo' better?
700R4 or TH350
im leaning towards the 700R4 for the lower 1st.
condition, price, adapters, etc the same.
a modern 700 is stronger but has a TV cable to worry about
at least it works in the rain
...
what is the threshold for a D44 ring and pinion. 5.13? 5.38?
I have 4.88s and they looked small. I can't imagine that 5.13s or higher would have anywhere close to enough contact surface.
I think 5.13 is the lowest you can go you get into a real small pinon even me d60 5.13s have a small pinion
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
What size are Jeep YJ body bolts? Are all 10 the same or are the four rear ones smaller? I don't have one here I can look at.
Posting Permissions
Reply With Quote