6 should be fine
6 should be fine
Originally Posted by afroman006
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
I'm pretty sure I saw 5k and other stuff available at Smiley's, and then there is the one with the knob that plugs into the same port.
Or you could ditch the loincloth and club and let the computer control the rev limit
...
if i'd known it was going on ugly i coulda just sold you some of this
you can get different RPM modules from 3000-12000rpm in 100rpm increments
http://store.summitracing.com/egnsea...00122+%2D98388
Last edited by rockfrawg; 06-24-2008 at 03:53 PM.
http://www.corral.net/tech/powerplant/arm/
"Desired RPM = (resistance in ohms) + 1000"
...
sweet! Definitely gonna do that! 6k is probably fine but I will probably shoot for 5, I have looked down and seen the tach at 6 before and it scared the shiat out of me.
If you buy those chip sets from Summit, I may buy 1 or 2 from you that you don't need.
Which ones you need? I had alot but went to one of the turn knob things.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
A 5k or something close would be perfect.
If you're handing them out, wanna drop a 5500 in the mail for me?
I'll look later tonight.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
sweet thanks
Garrett you should be alright with the 'pane but here's some MSD/22re tech:
http://www.pirate4x4.com/forum/archi.../t-436107.html
Guess I need a tach adapter...looks like it's just a transformer. Flem, got instructions for how to make one of those?
Last edited by uglyota; 06-25-2008 at 02:08 PM.
Yea, I found that article on the install on pirate, don't know if that's the same one, but the one I saw was the cleanest Toyota engine bay I've ever seen.sweet thanks
Garrett you should be alright with the 'pane but here's some MSD/22re tech:
http://www.pirate4x4.com/forum/archi.../t-436107.html
Guess I need a tach adapter...looks like it's just a transformer. Flem, got instructions for how to make one of those?
I haven't purchased the tach adapter yet and I'll wait to see if I'm going to keep the runner before I order and install either.
couldn't find any, I think thats the reason I ordered the turn knob. I did find a random bag of msd parts, but they must not be that important if I didn't use them. I'll look in Houston but don't count on it.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
did you get it yet?
i halfway remembered something last nite about the proper spark plug wires...there was a big warning somewhere that said "DO NOT USE WITH SOLID CORE WIRES"...might double check what you've got
oh sh1t I thought I texted you. Yeah I got it, looks great! Thanks again!
Posting Permissions
Reply With Quote