Page 1 of 2 1 2 LastLast
Results 1 to 15 of 16

Thread: TJ axles and parts

  1. #1
    Rock and Roll AggieTJ2007's Avatar
    Join Date
    Oct 2004
    Location
    Headed back to the Big D
    Posts
    6,182

    TJ axles and parts

    I don't have a clue on the prices so PM me and we can work something out.

    All parts out of a 200 TJ with about 80,000 miles

    TJ rear axle

    Dana 44
    4.56 Genuine Gear set professionally installed
    Full Detriot
    Alloy USA chromo shafts
    Tera Disk Brakes
    upgraded to 1310 u-bolt style pinion yoke
    some sort of heavy ass diffcover Rockcrusher or something like that
    Has fresh wheel bearings

    TJ Front Axle

    Dana 30
    4.56 Genuine Gear set professionally installed
    Aussie locker
    Hydro Assist (ram included 1.75x8 )
    HD One-ton steering (1.5x.385 wall tubing)
    I have 2 extra unit bearing and a few extra shafts that could go with it.
    I an entire spare housing, however it is bent so only good for bearing/brakes
    one Chromo stub shaft.
    I went through the axle in March and all of the bearing and gears looked in good shape

    Rubicon Express suspension

    3.5" superflex lift
    all control arms have flex joints on one end and bushing on the other
    all control arms upper and lower are ajustable so that proper steering angles are maintained

    Adjustable trackbars front and rear, HD rear track bar

    Bad: it needs new bushings on all of the control arms. Rubicon express sell them for $13 each

    Yellow half doors with black soft uppers. Door are in great shape rarely used. $500

    M.O.R.E Bolt in sport cage. Bolts to the floor through the drain plugs and the factory B pillar. You don't have to cut the dash and it adds alot of extra protection. $125

    PM if you have any questions or want pictures.
    Quote Originally Posted by afroman006
    Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
    Quote Originally Posted by afroman006
    So driving by brail is why your jeep looks the way it does eh?

  2. #2
    Registered
    Join Date
    Dec 2007
    Posts
    216
    Will anything from that lift work on an XJ?

  3. #3
    Rock and Roll AggieTJ2007's Avatar
    Join Date
    Oct 2004
    Location
    Headed back to the Big D
    Posts
    6,182
    all of the front suspension parts should work
    Quote Originally Posted by afroman006
    Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
    Quote Originally Posted by afroman006
    So driving by brail is why your jeep looks the way it does eh?

  4. #4
    Registered william_ace's Avatar
    Join Date
    Feb 2004
    Location
    College Station, TX
    Posts
    1,104
    pm sent

  5. #5
    Registered
    Join Date
    Sep 2008
    Location
    Dorm 2
    Posts
    17
    would you happen to have an extra hub for that dana 30?

  6. #6
    Buckaroo Bonzai!!! Reckless's Avatar
    Join Date
    Dec 2005
    Location
    BFE, Tejas
    Posts
    3,655
    Ill take the hydro ram and a track bar

  7. #7
    Rock and Roll AggieTJ2007's Avatar
    Join Date
    Oct 2004
    Location
    Headed back to the Big D
    Posts
    6,182
    Yes I have an extra hub, how does $30 sound
    Quote Originally Posted by afroman006
    Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
    Quote Originally Posted by afroman006
    So driving by brail is why your jeep looks the way it does eh?

  8. #8
    Registered william_ace's Avatar
    Join Date
    Feb 2004
    Location
    College Station, TX
    Posts
    1,104
    you get the PM?

  9. #9
    Rock and Roll AggieTJ2007's Avatar
    Join Date
    Oct 2004
    Location
    Headed back to the Big D
    Posts
    6,182
    All Parts now for sale individually.

    Detroit $300
    Chromoly Axle Shafts $175
    Disc Brake conversion $175
    4.56 ring and Pinion $125
    Bare Dana 44 housing with TJ axle brackets $175

    Prices Negotiable
    Last edited by AggieTJ2007; 10-06-2008 at 05:59 PM.
    Quote Originally Posted by afroman006
    Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
    Quote Originally Posted by afroman006
    So driving by brail is why your jeep looks the way it does eh?

  10. #10
    Boost Junkie breckboarder55's Avatar
    Join Date
    Sep 2008
    Location
    CS
    Posts
    930
    So the 44 is parted out?

    Do you still have the trac bars? *very interested*

    and finally... Looking up info on the cage!
    SHUT UP AND WHEEL

  11. #11
    Once was lost... BMFScout's Avatar
    Join Date
    Apr 2002
    Location
    Wylie, Tejas
    Posts
    12,075
    the cage is a steal.
    Boats and hoes

    Stumble in to the liquor store
    With a dollar-fifty for a bottle of wine,
    I know just what I'm lookin for
    Thunderbird will do just fine.

  12. #12
    Boost Junkie breckboarder55's Avatar
    Join Date
    Sep 2008
    Location
    CS
    Posts
    930
    yeah, im interested... See what he has to say...
    SHUT UP AND WHEEL

  13. #13
    Rock and Roll AggieTJ2007's Avatar
    Join Date
    Oct 2004
    Location
    Headed back to the Big D
    Posts
    6,182
    No word on the 44, I am talking to someone but have not heard anything definet

    I have the cage PM me about it

    Trackbars go with the rest of the suspension lift
    Quote Originally Posted by afroman006
    Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
    Quote Originally Posted by afroman006
    So driving by brail is why your jeep looks the way it does eh?

  14. #14
    Sand Man Shaggy's Avatar
    Join Date
    Dec 2007
    Location
    San Antonio or Victoria
    Posts
    2,337
    PM sent
    Jonathan Tate
    361.676.6466
    2010 Dodge Ram 2500 4x4 6.7 MegaCab
    2004 Jeep TJ
    1992 Jeep YJ
    2008 Jeep JKU
    2013 Ford Explorer Sport (mama's go fast car)

  15. #15
    Registered william_ace's Avatar
    Join Date
    Feb 2004
    Location
    College Station, TX
    Posts
    1,104
    do you still have the lift

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •