Come to find out, FJ 40 u-joint flanges dont match PU flanges. Need a set of pu driveshafts that i can build off of.
Come to find out, FJ 40 u-joint flanges dont match PU flanges. Need a set of pu driveshafts that i can build off of.
Is it the bolt diameter or the mating surface that doesnt match?
2 will match but the other 2 are a half hole off. bolt diameter is the same. Isn there like 3 different bolt patterns on toyota drive flanges?
Yes, there are several patterns. Several companies make a flange that accepts all 3. I might have a front shaft in the garage you can have for cheap if you need it.
why don't you just redrill the holes
Originally Posted by afroman006Originally Posted by afroman006
Because then he's have slotted holes on 2 of the 4 connections and only 2 bolts would be in shear instead of 4. Those flanges and stock driveshafts are cheap.
Rowdy - no driveshaft, I must have given it away.
what he is saying is that rotate the shaft and drill 4 new holes. marlin crawler has the 3 pattern flanges for 25 bucks. we will see what i can do first
cause they came with the rig and im poor