Anyone know where you tap a 1980-1996 Ford steering box for hydro-assist? There used to be a thread on fullsizebronco, but the pictures don't work anymore. I could not find anything on pirate or here. Anyone got any info?
Anyone know where you tap a 1980-1996 Ford steering box for hydro-assist? There used to be a thread on fullsizebronco, but the pictures don't work anymore. I could not find anything on pirate or here. Anyone got any info?
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Not sure this helps but I'll post it anyway.
http://www.pirate4x4.com/tech/billav...Tap/index.html
i have one tapped already. $50 its yours
Ryan Clarke
(214)695-7901
For reference this is where you tap the box.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
fwiw it doesn't have to be tapped in those locations, there is a shiatload of spots on a box you can tap if those spots are obstructed in the truck.
I just wanted to post it up, When I searched on the interweb I could find a lot of pics of 78-79 taps, but could find no pictures of newer ford taps. This particular box came off of Clarke's bronco (90's ish) and I put it on my '82 F150 frame, so the locations should work for most application.
Last edited by KrazyKarl02; 11-12-2009 at 11:52 AM.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
it's just that I see so many cludged adapters and elbow's poeple use to get the lines routed around stuff when they could have just picked a better spot to tap. I want to weld fittings on mine at a spot I can get the two fittings as close together as possible so the lines can run real cleanly bundled together.