d-30 stuff, airline, misc.

[85cj7]

ill take the fan, can you bring it to the meeting?

brian, I went a got it out of storage, its a 14" not 16", still interested?

[bcolman]

i think thats a little small for for the blazer, even though it was going to be a spare

[85cj7]

I'l bring it and you can take a look.

[bcolman]

ok

[85cj7]

Built Tie Rod and Drag link for widetrack d-30 from CJ7, 1.25" DOM tubing with one year old tie-rod ends and jam nuts. Will also give you some spare tie rod ends I have. Painted black-$125

(2) 15X10 Steel American Racing AR767 wheels, black, 5x5.5-$35

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air and were driven on until today. Make good rollers or cheap work tires/spares-$5 each

YJ Power Brake Master Cylinder with fittings to attach CJ brake lines, bolt it up to a cj or yj. -$15

Dana 30 4.88 ring and pinion (Brand New)-$75

Dana 30 3.73 ring and pinion (Used) -$35

Dana 30 yoke-$10

Dana 30 u-bolts and custom 1/2" plates-$5

14" electric fan, brand unknown, works fine-$10

(2) cj stock proportioning valves-$5

cj7 drivers side side view mirror, faded-$5

braided stainless brake line, 24" long with banjo fitting at one end and standard 3/16" female on the other-$5

Left and Right d-44 knuckles (non-flat top) with balljoints and spindle studs-$40

d-44 driveslugs-$40

ARB bulkhead fittings kit-$10

Reamer for cj7 tapered tie rod/drag link ends 7/16"-1" (only used once)-$25

Wagoneer Tie Rod, ends are unknown condition-$10

Stock CJ7 Pitman arm-$10

F-250 pitman arm, looks like a 1" drop, stock-$10

Stock d-30 cover-$10

CJ-7 spindle nut socket-$10

Assorted Emblems, Speak Up if you see one you want

New Stuff

[85cj7]

(2) 15X10 Steel American Racing AR767 wheels, black, 5x5.5-$35

(3) 255x70x16 Goodyear Wranglers. 25% tread left, some cracks, hold air and were driven on until today. Make good rollers or cheap work tires/spares-$5 each

YJ Power Brake Master Cylinder with fittings to attach CJ brake lines, bolt it up to a cj or yj. -$15

Dana 30 3.73 ring and pinion (Used) -$35

14" electric fan, brand unknown, works fine-$10

cj7 drivers side side view mirror, faded-$5

Chevy Left and Right d-44 knuckles (non-flat top) with balljoints and spindle studs-$40

d-44 driveslugs-$40

ARB bulkhead fittings kit-$10

Reamer for cj7 tapered tie rod/drag link ends 7/16"-1" (only used once)-$25

Stock CJ7 Pitman arm-$10

F-250 pitman arm, looks like a 1" drop, stock-$10

Stock d-30 cover-$10

Assorted Emblems, Speak Up if you see one you want

[Seth]

Interested in the drive slugs. Do they fit all 44s? Specifically, 78-79 hp44?

[85cj7]

mmmmm. Don't know. Maybe someone else could help out. Came off of chevy outers from Brian's Blazer's stock front I now have in the Jeep. 19 spline shafts if I remember right. Can get you measurements and spline counts if needed.

[colman]

they are from a waggy, the housing is from brian, 8 lug from something i parted out and dslugs are waggy. they should work in any d44 that is 19 spline and internal style hubs