Cut 1/2 coil out or put a sherman tank motor in it.
Cut 1/2 coil out or put a sherman tank motor in it.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
New bump stops. The stock ones were dry rotting, I broke them off with my hands. Seems I neglected these long enough because the track bar mount on the axle hit the frame. I extended them 1" so that even if the bump stop is compressed down all of it's steps i will still have about 1" before the track bar mount hits the frame.
The res on this shock makes it hard to make towers. Don't have the room for the tube style so I'm gonna have to get creative.
So I drew a shock.....then this design.
Then had some keystone and realized that was stupid
as for fixing the stink bug......the coil bucket mounting bolts go through the engine crossmember, so it'd be a bitch to redrill them. cutting coils off is kind of ghetto but I might do it.
The spring rate is too high and the front doesn't flex all the way anyways so I don't see cutting a coil reducing travel.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
if spring rate is too high, cutting will only make it worse
...
Looks short. I'm guessing the axle side mount is low on the tube?
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
44s
92 YJ
04 F-150 4x4
11 F-250 4x4
Did he go get them?
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Is he gonna actually tell me that he backed out of the deal he made for my tires? Doubtful since he has not returned the one I loaned him for free over 6 months ago.
What a good guy.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Just take all of his valve stems at alto, I'm sure you'll feel better when he finds out his rims are pinching his brand new 44s
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
44's should be interesting to watch on this contraption, i see lots of breakage and not alot of fixing in the future for this rig