That bolt is 2 threads on for mock up....stop is held on by the heim.
That bolt is 2 threads on for mock up....stop is held on by the heim.
Originally Posted by Sharpe
Od of the rod end is smaller than of of the RAM.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
100% bolt on. gay.here's how psc says to mount it.
even though you have a janky stop, i'd still be weary of turning the wheel too far. i.e. pay attention to when it binds.
Last edited by sasquatch; 04-09-2012 at 06:32 PM.
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
I bet Coleman is referring to the threads being in shear.
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
I had my ram mounted as low as Tommy does and even with the little skid coming off the t-rod, it only lasted 2 runs. THen I went high-steer. Tommy wheels like a bitch though, so it should be fine.
92 YJ
04 F-150 4x4
11 F-250 4x4
this, also when you get a new bolt drop the bolt in from the top as some insurance incase you loose the nut
lets see your **** look as clean as that.
Went to vilas' and they're making me one.
With the track bar bracket where it is i can't put a bolt in from the top.
Went to vilas' and they're making me a new steering stop.
With the track bar bracket where it is i can't put a bolt in from the top.
Last edited by TdmayfieldIV; 04-10-2012 at 01:23 AM.
It's a brand new truck, if it didn't look clean he should be subjected to driving a hybrid. Anybody can bolt **** on, actually building something takes skill and effort. That's why (except for the one with ttb) jeeps are gay.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Who cares if it's bolt on if it works.
BDR
yeah, lots of bolt ons indicates that you started with a decent platform
...
it's bolt on so chodes that think they need hydroassist on the street for their big gay douche trucks can just slap it on in the parking lot of the frat house. $5 of plate can accomplish what that $200 bracket does, unless you're an inept fabricator. if you want to flush the $ for a bolt on ram mount that's going to get smashed on the rocks, be my guest.
it looks like a 60, the same platform as every other truck out there...
Last edited by sasquatch; 04-10-2012 at 09:36 AM.
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
So your problem is not that it's bolt on...it's that chode frat boys might use it to accessorize their big gay trucks.
BDR
Posting Permissions
Reply With Quote
