I need one.........anyone got it?
I need one.........anyone got it?
I've got one i'll sell you for $10. I've got another one that is slightly bent and pitted so i'll throw that one in for free.
Edit: well have to measure your old one and the ones I have to be 100% positive. But i'm 99% sure it's the part you need.
Last edited by 85cj7; 01-18-2010 at 11:21 PM.
didn't Tyler tell you we probably have one?
Born to Kill
Originally Posted by RCcola55
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
make shure yours are ford ryan, the ford ones are a different length than everything else
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
No ttb stubs are different lengths. Solid front ford Dana 44's are the same. I've got some stubs, $25 a piece if you don't get ryan's.
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
they are for 5x5.5 hubs, but they could be waggy and not ford. Like I said i'll have to measure to be 100% sure.
i know all ford 44's are the same i was telling ryan that not all 44's across makes are the same, ford stubs are different than jeep or chevy and then scout is its own bastard. hubs have nothing to do with stubs
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
karl/Frick should have some I gave to Karl a while back.
Seth Stewart '04
2000 Suburban DD
1995 F150 SAS - Needs more work to sell
1998 GMC pickup - sold
2003 Yukon XL - wrecked/motor donor
1975 Scout - TBD
1976 Scout - parts truck
1972 IH 1310 dually - TBD
196? Scout 800 - 302 roller
I'll bring his old one over to compare Blanken****.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
Yeah, i need the whole driver side shaft now. We tried to make the old one work but i has been wallowed out and bent from the broken u-joint
That's what she said!
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
Just weld the caps in and then shoot it full of grease
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
we tried but the shafts are too fubard. When we tried to press a joint in it wouldn't even go in without ripping the seal completely off.
This is my daily driver, i don't need to be jerry rigging anything........anymore
Double post
Last edited by TdmayfieldIV; 01-20-2010 at 11:56 PM.
I am thinking about buying Travis' whole front axle out of his bronco. That way i have spares of everything
Posting Permissions
Reply With Quote