you may take the shear stress off of the bolts holding on the winch, but it will still be on the bolts holding the bumper on to the truck
you may take the shear stress off of the bolts holding on the winch, but it will still be on the bolts holding the bumper on to the truck
lets do it
Ryan Clarke
(214)695-7901
should fit on half a sheet of 4x8
...
1/8 or 3/16 or do half and half
Ryan Clarke
(214)695-7901
what does a sheet of metal run these days
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
no idea, but a fab shop pays less.
...
but they will still charge you the same or more than they bought it for
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
I'm not sure what your getting at, in my experience they charge by material used. That other half will go to other customers.
...
go get some mill plate at bryan iron and metal
I got some cardboard from uhaul today.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
I think that Cody at Hughes Fab in Navasoto can cut it out for you, he is a TAMOR member but you may have not met him yet. The bumper looks good i like it
Originally Posted by afroman006Originally Posted by afroman006
you can get free cardboard boxes from the computer labs on campus fyi, they usually have stacks of them from printer paper
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come