Just putting this out there to see if anybody has any 16ga 1" square tubing laying around. I'd probably buy it if anybody has some.
Just putting this out there to see if anybody has any 16ga 1" square tubing laying around. I'd probably buy it if anybody has some.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Gonna build yourself a cage? You sure that isn't overkill?
Originally Posted by Fredo
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
i have about 10 sticks of 3/16th 1" square if that is helpful at all
Jonathan Tate
361.676.6466
2010 Dodge Ram 2500 4x4 6.7 MegaCab
2004 Jeep TJ
1992 Jeep YJ
2008 Jeep JKU
2013 Ford Explorer Sport (mama's go fast car)
That's too heavy for what it'll be used for.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Looking for 7.62X54R, don't have enough cash for a tin of it and, and champion is out of surplus, all that's left in town is brown bear at Gander Mountain. Going out to the farm this weekend and I want to shoot quite a bit of it.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Check burdets. I saw some in there last weekend
Violence, naked force, has settled more issues in history than has any other factor, and the contrary opinion is wishful thinking at its worst. Nations and peoples who forget this basic truth have always paid for it with their lives and freedoms." — Robert Heinlein
have fun shooting quite a bit of it, i put maybe 30rds through mine this past weekend and im still hurting
Ryan Clarke
(214)695-7901
It's for several people. I know how much shooting any large quantity of 54R sucks.
Edit: getting some from sharpe
Last edited by Sparling; 10-07-2010 at 09:36 AM.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Looking for somebody with a manual parts truck so I can get a hydro clutch set up. I've got the trans, bell housing, clutch pressure plate, TO bearing and pilot bushing covered. Keeping my eyes out on CL, but if nobody has anything I'll just hit up a junk yard at thanksgiving.
Parts I need:
Slave Cylinder
Clutch Master cylinder
Clutch Line
Clutch/Brake Pedal Assembly
Metal Brace for Clutch master cylinder
Crossmember
Floor Access Panel
anything else anybody can think of
And a ford D44 front and 8 lug outers for it
Last edited by Sparling; 10-14-2010 at 02:45 PM.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Anybody have an extra AK trigger guard laying around? I need one with a mag catch on it and I don't want to pay 25 bucks for one from one of the various parts websites
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
I need all the parts from the spindle out from a 10 bolt, and the outer stub shafts. If I have to buy a whole axle or knuckles out that's fine, I'll just scrap the rest.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
if its 6 lug, 78 or newer big jeep (cherokee, wagoneer, truck) will work too.
...
Should've specified. I need 8 lug stuff with the caliper bracket in front of the spindle.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
10 bolt and d44 outers *everything, is the same.....
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
Get in line, ive been waiting for the same thing to pop up for a year now. Every time i see it come around people want way too much
Ryan Clarke
(214)695-7901
Posting Permissions
Reply With Quote