so i guess this means lunch is off for today, ed?
looks good guys.
Rowdy is funny and Sharpe you need to stop shanking people
Oh and good job on keeping the power steering reservoir topped off sharpe
Originally Posted by afroman006
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
When is it pulling out? I might stop by later tonight if yall are still working on it.
92 YJ
04 F-150 4x4
11 F-250 4x4
Anyone know if dual tbi's has been done before? If not that is awesome!! Hope everything goes as planned today.
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
I've seen it done in pictures, but I don't know what computer was being used. The tbi computers that we all use for this stuff will not work in stock configuration. They are peak and hold injectors and the peak time is based on current which doubles with the additional injectors. its a lm1949 and there is a .1ohm resistor that controls the peak time, its value had to be cut in half to .05ohm (not something midstate or radio shack can get) so we cannibalized a junk camaro tbi computer for the resistors and soldered them on the board in parallel. Without modification the driver goes into hold mode before it hits the peak voltage and the injector either won't open or won't completely open.
If someone has an extra 1227747 ecm sitting around we could use it. I'm not certain on the longevity of this hack, there might be a reason I haven't seen anyone do this.
Last edited by robertf03; 06-04-2010 at 01:28 PM.
...
Clayton has one I sold him with all of my tbi crap. He might let you borrow it if necessary.
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
http://dallas.craigslist.org/dal/pts/1742578201.html
Here you go Clarke. Me being helpful.
Now that is funny, you have to admit!
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
You still are a piece of **** in my eye, thanks for the help
Ryan Clarke
(214)695-7901
Swung by earlier. Flem is wiring, Clarke was fabbing up the intake. They still have to put new gears in the front tonight in order to have it at the exhaust shop tomorrow morning. Good luck guys.
92 YJ
04 F-150 4x4
11 F-250 4x4
come on clarke, pretend like The Beast is an unruly bar patron...and knock that sh!t out!
In utah gonna take a nap later then be in vegas in the morning
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
I've always suspected 12 volt guy stuff was junk, after working with this I've realized I was wrong. Its ****ing junk.
rewired the majority of the chassis today. No more random sparks when you shake the truck!
...
the beast is on the trailer and headed to cali
Ryan Clarke
(214)695-7901
Posting Permissions
Reply With Quote