o the front doors are power windows and power locks so i would assume xlt
o the front doors are power windows and power locks so i would assume xlt
also has a custom ranchhand on rear that looks pretty good
Yeah I would only need the front two. Do you have pictures of the bumpers? or pictures of other trucks with the same bumper? Does that 100 for the motor include the electronic shenanigans needed to make it run?
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
How much for the clutch/brake pedals with the hydro parts?
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
its only the rear bumper call me tom and ill get you pics via phone or something, you can have all the wiring you wana pull with it. how about 30 for the door pannels? as for the clutch stuff w/ hydro how does 70 sound and u can just deduct what i owe you from that?
quiero back door
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Nvm I just stopped and looked at it and the enterior is blue
one large dent. might be able to be popped out. truck is located in montgomery
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
Actually both rear doors have these massive dents... You could prob pull them out pretty easy. They are manual windows on rear also. Sparling u want the motor and wiring harness? Frick u want clutch and hydro parts?
Yeah, I want the motor and harness, I won't be able to pick it up until june 1st.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
Axle, ac comp, motor and harness are all gone.......