Results 1 to 10 of 10

Thread: Ford Dana 60 front, chevy 6.0 flywheel, sm 465/np 205

  1. #1
    True Hollywood Stry
    Join Date
    Sep 2003
    Location
    somewhere in texas
    Posts
    4,821

    Ford Dana 60 front, chevy 6.0 flywheel, sm 465/np 205

    Alright I got this axle from a friend of mine in trade for some other crap I had.

    Specs 1993 ford balljoint Dana 60 front
    The axle was going to be put in my friends jeep, but he sold the project and moved on. It is currently disassembled,as he was starting to rebuild it.

    There are some new parts and some small parts missing, but they are the parts you would typically replace when building an axle.

    Parts I have:
    housing with 3.54 gears housing has been cleaned and painted
    brand new calipers, never been ran or mounted
    both knuckles with spindle studs and balljoints
    both spindles with locknuts
    both inner and outer axle shafts(also have a spare stub and couple used joints)
    both hub/rotor assemblies( rotors might be turnable)
    two inner wheel bearings and one front
    two new inner and outer bearing races
    one extra diff cover

    things needed or that I would replace
    1 outer wheel bearing( I would replace them all)
    1 set of locking hubs- easy to find in junk yards
    replace the ball joints(about $100 total)
    brake pads

    price is firm at $400

    I can also save you about 10-15% on parts needed to complete it from my parts account so if you want me to we can work that out.

    Chevy efi 6.0 flywheel for a standard $25

    chevy sm465 4 spd trans with 6.55 granny low, comes with bellhousing, shifter , clutch, pressure plate, shifted fine when removed- $100

    chevy np 205 ten spline, figure 8 pattern, fixed rear yoke, with adapter and shifter. Missing front output flange- $100

    Ford np 208- $30

    chevy 52" springs 5 leaves plus overload I believe-$60

    cheap harbor freight 3/8 corded drill almost new- $10







    Sparling has first dibs on the 60 I can email pics of the parts so post ur email if you want pics.
    Last edited by stx4wheeler; 09-24-2010 at 04:18 PM.
    He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!

  2. #2
    Teaching America's youth RCcola55's Avatar
    Join Date
    Sep 2004
    Location
    with your mom
    Posts
    2,815
    cook needs the leaves, ill let him know
    Ryan Clarke
    (214)695-7901

  3. #3
    Resident Ricer Sparling's Avatar
    Join Date
    Jan 2010
    Posts
    2,782
    '91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat

  4. #4
    No progress... bburris's Avatar
    Join Date
    Apr 2002
    Location
    Dallas, TX
    Posts
    6,336
    I snet you a PM a little bit ago.

  5. #5
    True Hollywood Stry
    Join Date
    Sep 2003
    Location
    somewhere in texas
    Posts
    4,821
    pics coming you alls way
    He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!

  6. #6
    Big Baller 85cj7's Avatar
    Join Date
    Sep 2006
    Location
    The Big 'D'
    Posts
    3,900
    I need the leaves as well (as long as they aren't beat the **** up). You say they are 5 leafs plus overload. I'm gonna say a 6(5/1) configuration. Do you happen to know which ones they are, either. . .

    pack thickness=2 1/8"=spring capacity=1875lbs
    or
    pack thickness=2 1/4"=spring capacity=2200lbs

    At this point i'm being picky though. If they can find away into my shed in college station then I can paypal you the money immediate!

    pics please. ryan.k.blankenship@gmail.com
    Quote Originally Posted by jerryg79 View Post
    i dont speak australian.
    Quote Originally Posted by jerryg79 View Post
    seacrest, you are my hero!

  7. #7
    True Hollywood Stry
    Join Date
    Sep 2003
    Location
    somewhere in texas
    Posts
    4,821
    Sale pending on axle.

    I think I have two sets of 52's, one set has the overloads cut down I think. Seacreast I'm not measuring the springs, as far as beat to **** they are leaf springs from a 1979 truck I can't vouch for how they have been treated over their 31 years of life. I'll get a pic or two when I get a chance.
    He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!

  8. #8
    True Hollywood Stry
    Join Date
    Sep 2003
    Location
    somewhere in texas
    Posts
    4,821
    60 sold
    He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!

  9. #9
    Old school badass Seth's Avatar
    Join Date
    Apr 2002
    Location
    Brazos County
    Posts
    5,711
    Keep the drill. Nice to have 2 when you are using two different bits.
    Seth Stewart '04
    2000 Suburban DD
    1995 F150 SAS - Needs more work to sell
    1998 GMC pickup - sold
    2003 Yukon XL - wrecked/motor donor
    1975 Scout - TBD
    1976 Scout - parts truck
    1972 IH 1310 dually - TBD
    196? Scout 800 - 302 roller

  10. #10
    True Hollywood Stry
    Join Date
    Sep 2003
    Location
    somewhere in texas
    Posts
    4,821
    Trans/tcase sold

    6 pack of lonestar in bottles for the drill.

    Seth I already have two drill that are better quality.
    He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •