Results 1 to 9 of 9

Thread: Dodge Dana 60 Kingpin with high steer arms, forged yoke, etc...

  1. #1
    Yo soy tu papa! Doug Krebs's Avatar
    Join Date
    Apr 2002
    Posts
    5,540

    Dodge Dana 60 Kingpin with high steer arms, forged yoke, etc...

    Not sure why I never posted this over here... I copied it from another forum, so if anything is missing just ask questions.

    Has the following:

    Forged 1350 yoke
    High steer arms/tie rod behind the axle
    Uses 8 ARP studs on the arms rather than bolts.


    Calipers/pads/rotors/kingpins all brand new 2 years ago. They have less than 100 miles on them. I wheeled it 3 times since the dana 60 was installed and parted it out last year.

    I can't remember if I welded just the spider gears or welded them to the carrier. Has 4.10's, but the threads on the pinion nut are fubared. If it's taken off again, I doubt the pinion would be reusable.

    Does not include the tie rod/drag link and brake lines that are in the pictures...

    Price is $1200 located in bryan.

    Edited to add pics:

    I dragged the axle outside knocked the surface rust off the rotors and washed it. I might get some better pics tomorrow at lunch. It was getting late when I took the pics.










    1988 Blazer...RIP

  2. #2
    Yo soy tu papa! Doug Krebs's Avatar
    Join Date
    Apr 2002
    Posts
    5,540
    Couple of day time pics:





    1988 Blazer...RIP

  3. #3
    Yo soy tu papa! Doug Krebs's Avatar
    Join Date
    Apr 2002
    Posts
    5,540
    hell might as well bump this... email me as I rarely get on here. dougkrebs02 at gmail
    1988 Blazer...RIP

  4. #4
    Yo soy tu papa! Doug Krebs's Avatar
    Join Date
    Apr 2002
    Posts
    5,540
    Still holding down the garage floor! email me at the address above.
    1988 Blazer...RIP

  5. #5
    Yo soy tu papa! Doug Krebs's Avatar
    Join Date
    Apr 2002
    Posts
    5,540
    Almost a year, might as well bump this!
    1988 Blazer...RIP

  6. #6
    Hazaa Fredo's Avatar
    Join Date
    Apr 2002
    Location
    at the parts store, confusing the **** out of the guy.
    Posts
    4,980
    I think you need to just find a rig to put this under and come back to the world of offroading Doug. It's still a lot of fun in case you forgot.
    "You know, this car is so fast, that giving Corvette owners this car, is kinda like giving an AK-47 to a pysch ward."

    -Ron Fellows (Corvette C6R Team Driver)

  7. #7
    Yo soy tu papa! Doug Krebs's Avatar
    Join Date
    Apr 2002
    Posts
    5,540
    Quote Originally Posted by Fredo View Post
    I think you need to just find a rig to put this under and come back to the world of offroading Doug. It's still a lot of fun in case you forgot.
    Maybe in a few years, and I've got a Ford High Pinion saved for that.
    1988 Blazer...RIP

  8. #8
    Once was lost... BMFScout's Avatar
    Join Date
    Apr 2002
    Location
    Wylie, Tejas
    Posts
    12,075
    I am a buyer if you can provide warranties on the parts. I think most of them have a 10 year deal...
    Boats and hoes

    Stumble in to the liquor store
    With a dollar-fifty for a bottle of wine,
    I know just what I'm lookin for
    Thunderbird will do just fine.

  9. #9
    Yo soy tu papa! Doug Krebs's Avatar
    Join Date
    Apr 2002
    Posts
    5,540
    Sold a few days ago for $700 minus the steering setup. Now I can buy some speakers!
    1988 Blazer...RIP

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •