Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Thread: 83 Waggy and Parts

  1. #1
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352

    83 Waggy and Parts

    STOCK Front and rear leafs. $100

    5 36X12.50X16.5 Military Goodyears old style with 7 16.5 wheels, 5 are mounted and ready to go. 2 wheels have tires that are bad on them. Yes there is tons of dry rot on these things but they still hold air/stand up on their own. Obviously would not drive with these on the road!!!! $100

    I have an aluminum adapter for the 350 to a 231 also. $60.

    Stock Cat and Flowmaster 50 (2009) with about 8ft of pipe all welded together. 2 3/8 pipe in front of cat and 2.5" at end. $60

    Everything located in St. Hedwig, East San Antonio.

    Only trades at this time would be an auxillary fuel tank w/ or w/o pump.

    Clayton 210-eight.63(one4three.5%)
    Last edited by texasxj; 07-09-2014 at 07:25 AM.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  2. #2
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  3. #3
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517
    you don't still happen to have your old small bearing spindles, caliper brackets and calipers laying around do you?
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  4. #4
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    Yes I have all the original 5 lug slugs, brake hardware etc.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  5. #5
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517
    I'm in need of a 5 lug setup. Do you have ford parts or did you mean 6 lug that the waggy had. I'm in need of the chevy/jeep small bearing 6 bolt spindles, backing plates and calipers and ford 5 lug rotors/ bearing hubs
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  6. #6
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    The waggy stuff is 6 lug. Don't know if its the same as chevy stuff. All the stuff I got from you I used I think.... I'll look. Send me your number again, cell above in first post.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  7. #7
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    231 and TH350 on hold.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  8. #8
    Rawr TexTJ209's Avatar
    Join Date
    Sep 2004
    Location
    Waco, Tx
    Posts
    3,606
    If you end up planning on scrapping the body, let me know. I could use a small patch panel from the cowl.
    '73 J2000 Thriftside Gladiator, 258/T14/D20
    '81 CJ7 Laredo, 258/T176/D300

  9. #9
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    Send me a pic of the area/s you want. My floors are good, I think. Plan is to pull axles and put body on trailer this weekend. Cell above. You can just send me shipping, unless its too big we can work something out.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  10. #10
    Rawr TexTJ209's Avatar
    Join Date
    Sep 2004
    Location
    Waco, Tx
    Posts
    3,606



    Basically I just need this part. The dented portion of the cowl in this pic off the passenger side. Gladiator has rust through right underneath the top body line.

    2-3" off the top of that top body line down to the bottom of the cowl panel where it meets the top of the fender should do fine. And it won't be a super big part to ship.

    Just let me know what shipping is. Thanks!
    '73 J2000 Thriftside Gladiator, 258/T14/D20
    '81 CJ7 Laredo, 258/T176/D300

  11. #11
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    You getting out of the 4x4 game Clayton? Or hopefully upgrading?
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  12. #12
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    Kasey, I will try to get a pic of that area on mine tonight.

    Karl, i'm putting jeeps on the back burner for a while. Just don't have the time or money and would rather spend said time and money on hunting stuff.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  13. #13
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    Kasey, the panel that I have is pretty dented right at the joint with the door frame. I'll put a pic up tomorrow.

    Axles are pulled and ready for pickup.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  14. #14
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    83 stock radiator - replaced 2008ish. Has aftermarket trans cooler and auxillery cooler for power steering. $150

    [IMG][/IMG]

    Chevy 350 to Waggy engine mounts. Never used only bolted up once. $140 tyd.
    http://www.bjsoffroad.com/prod-503.htm

    [IMG][/IMG]
    Last edited by texasxj; 07-09-2014 at 07:24 AM.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

  15. #15
    Registered User texasxj's Avatar
    Join Date
    Sep 2004
    Location
    St. Hedwig
    Posts
    1,352
    Price updates in original post.
    Clayton Rollins '08
    210-863-1435
    2007 Dodge Ram 3500 4x4 5.9
    1983 Waggy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •