Results 1 to 15 of 15

Thread: ford 5x5.5 rotors and spindle

  1. #1
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517

    ford 5x5.5 rotors and spindle

    anyone have any rotors and hubs laying around. i'm working on a disc brake swap for my 66 bronco d44 and have all the parts except for the hub/rotor combo and one small bearing fsj/chevy 6 bolt spindle. thanks
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  2. #2
    Dead or alive... mudtoy67's Avatar
    Join Date
    Nov 2002
    Location
    Tx
    Posts
    4,545
    I've got rotors on that ford. Not sure if the hubs are same or different on ttb but they're available too. Sparling wants the beams.
    BDR

  3. #3
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    I know the spindles are different on ttb, I think the hubs are the same.
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  4. #4
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517
    yep i'll take the hubs and rotors. they are the same and karl is correct the spindles are slightly shorter. i guess we should start a pile from that truck ***
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  5. #5
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517
    looks like bdr is finally going to take apart that truck so i'm getting my rotors but I still need a small bearing spindle. i have a large bearing one i could trade. or i might just have a buddy turn it down to the correct specs to match the small bearing..... anyone have a d44 spindle from a solid axle non ford laying around?
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  6. #6
    True Hollywood Stry
    Join Date
    Sep 2003
    Location
    somewhere in texas
    Posts
    4,821
    I might have some dodge spindles laying around. If I do $100 would take them.
    He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!

  7. #7
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517
    i only need one
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  8. #8
    True Hollywood Stry
    Join Date
    Sep 2003
    Location
    somewhere in texas
    Posts
    4,821
    They would go as a set I have no reason to have one spindle laying around.
    He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!

  9. #9
    Sand Man Shaggy's Avatar
    Join Date
    Dec 2007
    Location
    San Antonio or Victoria
    Posts
    2,337
    I just found one in my scrap pile behind my shop. It is rusty but probably still good. I can text you some pics if you want. For some reason I can't upload a pic. Spindle that is
    Attached Images Attached Images  
    Jonathan Tate
    361.676.6466
    2010 Dodge Ram 2500 4x4 6.7 MegaCab
    2004 Jeep TJ
    1992 Jeep YJ
    2008 Jeep JKU
    2013 Ford Explorer Sport (mama's go fast car)

  10. #10
    Sand Man Shaggy's Avatar
    Join Date
    Dec 2007
    Location
    San Antonio or Victoria
    Posts
    2,337
    Well I guess it did work.
    Jonathan Tate
    361.676.6466
    2010 Dodge Ram 2500 4x4 6.7 MegaCab
    2004 Jeep TJ
    1992 Jeep YJ
    2008 Jeep JKU
    2013 Ford Explorer Sport (mama's go fast car)

  11. #11
    Sand Man Shaggy's Avatar
    Join Date
    Dec 2007
    Location
    San Antonio or Victoria
    Posts
    2,337
    Might be a TTB one. I can't remember if my is supposed to be 5 or 6 bolt mount for traditional dana 44
    Jonathan Tate
    361.676.6466
    2010 Dodge Ram 2500 4x4 6.7 MegaCab
    2004 Jeep TJ
    1992 Jeep YJ
    2008 Jeep JKU
    2013 Ford Explorer Sport (mama's go fast car)

  12. #12
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517
    That is ttb. Thanks for looking. It is to short
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  13. #13
    ... TMatheaus's Avatar
    Join Date
    Nov 2005
    Location
    Bayou Vista
    Posts
    1,176
    Quote Originally Posted by colman View Post
    It is to short
    I have a feeling you hear this all the time
    Tommy Matheaus '06
    210-323-2546
    2004 F-140 4x4 DD
    1990 F-150 4x4 in the works
    1992 Jeep Cherokee basterdized

  14. #14
    lowballing someone
    Join Date
    Feb 2005
    Location
    Houstonish
    Posts
    3,517
    Yea your mom is very vocal
    Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come

  15. #15
    Flyin' the Hindenburg 2.0 DRAGOONRANCH's Avatar
    Join Date
    Jan 2006
    Location
    DAAAnngerrr Zone!
    Posts
    15,003
    bazinga!
    Quote Originally Posted by Fredo View Post
    Ask your dad what it tastes like.
    Quote Originally Posted by Tyler View Post
    Tell Chris to get it up and I will do it.
    My bitch better have my money...
    Through rain, sleet, or snow...
    My whore better have my money...
    Not half, not some, but all my cash...
    'Cause if she don't,
    I'm gonna put my foot in her ass.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •