I think It is Cody's YJ that it looks like the Rocker Skids are made out of angle Iron. I was just wondering If he made those or not? If he did I am interested in Making as set for my Jeep and selling my nerf bars that suck on the side
I think It is Cody's YJ that it looks like the Rocker Skids are made out of angle Iron. I was just wondering If he made those or not? If he did I am interested in Making as set for my Jeep and selling my nerf bars that suck on the side
Originally Posted by afroman006Originally Posted by afroman006
yep thats right. Cheap, easy, hold up well. Didn't really feel like spending a couple hundred dollars on a set
Cody Ainsworth || FTAC '05 || '91 YJ
4.0, SOA, 36" IROKs, D30/F8.8, LockRight/Detroit, 4.56s, Hydro-Assist, fullcage, TJ flares, blah blah blah.
www.Jeeps-Offroad.com || Pictures
I also have some of angle iron, and if nick had some 2 years ago his jeep would still look half decent.
What size angle iron did you use
Originally Posted by afroman006Originally Posted by afroman006
I'm going to Bryan Iron and Metal on Friday to pick up some stock for my rockers. You can come with me if you want.
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
I used 3x5x3/16. A little smaller would be fine, but for other reasons I had to have a 5". Don't use less than 3/16".
me put picture
I much do you think it would cost for the angle Iron for both sides?
yeah I would be interested in going with you on friday,
give me a call 956-793-1572
Originally Posted by afroman006Originally Posted by afroman006
hey robert let me know how they are on metal prices thanks
Clayton Rollins '08
210-863-1435
2007 Dodge Ram 3500 4x4 5.9
1983 Waggy
they are cheap... you are gonna spend more on hardware than on the angle iron
They make it easy to trash the rest of the body
3x3 1/4inch angle....drill a few holes and bolt it up.
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
'69 FJ-40, chevy383, sm420, 37's, RedNeckRam
'08 Tundra SR5 Poser Douche Rig on 35's
here's my TJ...4x4x1/4
Be really careful about where you put your bolts...there aren't a whole lot of perfect places to bolt into a TJ tub so measure twice
crappy pic:
closer pic - I used a grinder to form the edges at the fenders so I wouldn't catch a tire on a corner
Last edited by bburris; 11-03-2004 at 11:56 PM.
heres what i got... also very cheap to make, except these dont touch your body and can also function as a step, i already had some little body guards so i went with these...
both are cheap and work great.
rock skids
p.s. what did you do with you tj flares brett?... i need some