does such a thing even exist? If you've got some, i need 'em. Cheap, preferably, or trade for taller blocks (I think i've got 2" aluminum and 3" cast ones).
Thanks in advance
-Eric
I have some 2" zero rate things that have a 5 degree taper machined into em so they're a little shorter. They bolt to the spring pack but the angled surface is not recessed so the bolt will sit level. You could probably do it with a good enough job with a drill though. $30
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
they make 'em. check belltech @ ho'reillys. if you're junkyardin', 4x4 Fords came w/ an 1.5"-2" lift block factory.
No on the Ford thing...
...but O'Reilly and Auto Zone do carry them as lowering blocks I believe.
chop saw yours, then drill the hole........
Last edited by savvyaggie; 02-03-2005 at 01:17 PM.
What'll you give me for em? They cost me $100 new. They are solid steel and the top edges are rounded so they wont crack the springs.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
Yah it was like $100 total. $20 shipping (solid steel 2x3x6 blocks) and I had them custom made so they were more expensive than normal zero-rates. They're probably too tall for you though. Oh well.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
i have a chop saw it you need one........
just drill the hole first so that it will be lined up right.... got a drill too.....
and remember "Don't be afraid to actually fix the problem with the simplest solution."
Last edited by savvyaggie; 02-03-2005 at 01:18 PM.
If you still need some lift blocks theres several pair on a POS EB i just bought, yours free if you come get em