Page 1 of 6 1 2 3 4 5 ... LastLast
Results 1 to 15 of 77

Thread: cleanimg out garage and house

  1. #1
    back in Texas Broncocustom's Avatar
    Join Date
    Apr 2002
    Location
    Tomball, TX
    Posts
    349

    cleanimg out garage and house

    All this stuff is for sale. I do not have any prices yet, so just make me an offer if you want anything.

    '78-'79 Bronco hood and front inner and outer fenders. All in good condition. Will also work for '70's era ford trucks. They are brown and white.

    4 speed transmission (not sure if it is a T18 or T19) mounted to a NP205 transfer case.

    Ford 9” housing, Gusseted with no spring perches, 31 spline axle shafts and third member without gears (might have some 3.50 gears lying around if needed)

    Dana 44 front axle out of ’78 Bronco, I have 4.54 and 3.50 gears for this axle.

    Front Dana 44 warn chromemoly axle shafts new still in the box. Will fit 78-79 bronco and 70’s ˝ ton fords.

    2 sets of radius arms that came of the bronco.

    A couch and matching wooden chair.
    Table and four chairs
    Entertainment center that will hold 27” TV
    TV stand that will hold 32” TV and DVD and VCR (This is the one that was in the Dexter house that had the two 32” TV’s on it, well built)
    L-shaped computer desk.
    2 end tables

    Finally my BAR that was in the Dexter house. A one of a kind with over 1100 beer bottle caps covering the top of the bar.
    '50 F-1 (some day might be a 4x4)
    '10 Expedition EL
    '09 F150 Supercrew

  2. #2
    user friendly Cajun's Avatar
    Join Date
    Apr 2002
    Location
    League City
    Posts
    2,089
    How much do you want for the bar?

  3. #3
    ill be your pickup man
    Join Date
    Apr 2002
    Location
    San Antonio, Tx
    Posts
    5,785
    I am interested in the front D44. How about $150 for it with the gears.

    I don't know what the Warn shafts are worth, so let me know.

    Thanks
    92 YJ
    04 F-150 4x4
    11 F-250 4x4

  4. #4
    BigRedFord04
    Guest
    also interested in axleshafts...not b.c. i have the $$ or anything, just curious what you're askin'

  5. #5
    back in Texas Broncocustom's Avatar
    Join Date
    Apr 2002
    Location
    Tomball, TX
    Posts
    349
    As soon as I posted this stuff Troy sent me an email saying that he wants the bar, so if he does not end up wanting it I will post a price. I want $400 for the Warn shafts. They are worth around $550. I sold a second set just like these for $420 earlier this year to a guy in Nashville who drove down to pick them up. The 4.56 gear for the D44 are worth more then $150. Several people have said to sell it for $400.
    '50 F-1 (some day might be a 4x4)
    '10 Expedition EL
    '09 F150 Supercrew

  6. #6
    VW Ninja Jackasic's Avatar
    Join Date
    Apr 2002
    Location
    Jackasicstan
    Posts
    3,643
    Originally posted by Broncocustom
    The 4.56 gear for the D44 are worth more then $150. Several people have said to sell it for $400.
    Are they Berillium? I am pretty sure one could pick up new 44 gears for 150 to 175. Austin, how much were you 4.88 from Randys?

  7. #7
    user friendly Cajun's Avatar
    Join Date
    Apr 2002
    Location
    League City
    Posts
    2,089
    Originally posted by Jackasic


    Are they Berillium? :
    Nah, probably sphincterloy.

  8. #8
    back in Texas Broncocustom's Avatar
    Join Date
    Apr 2002
    Location
    Tomball, TX
    Posts
    349
    Sorry I was wrong about the price. They are $136 at 4 wheel parts. The only trips they have on them is the Moab trip in 2000, and a day trip to San Antonio. $150 for the whole axle is just alittle low. $400 for the front axle was just a suggestion from a couple of family members this weekend. It is a high pinion front 44. I am open to other offers. I will keep it for future projects if I can not get a decent price for it.
    Last edited by Broncocustom; 08-25-2002 at 09:48 PM.
    '50 F-1 (some day might be a 4x4)
    '10 Expedition EL
    '09 F150 Supercrew

  9. #9
    BigRedFord04
    Guest
    i did some business w/ a junkyard this summer and was told that he would sell me a complete 44 for $100. A couple other places told me $250-300 for a full one.

  10. #10
    bigFAWKINranger
    Guest
    Originally posted by BigRedFord04
    i did some business w/ a junkyard this summer and was told that he would sell me a complete 44 for $100. A couple other places told me $250-300 for a full one.
    i think $200 would be a good price james. i was kinda wondering what to ask for the axles i am tryin to sell. i am just gonna ask the junkyard if they'll trade me a complete 9" in exchange for an exploder 8.8.... i also have a d44 for a narrow track and am gonna ask $200.... you could always ebay that crap and make a killin too.

  11. #11
    sideways again... redcagepatrol's Avatar
    Join Date
    Apr 2002
    Location
    H-TOWN
    Posts
    4,270
    Originally posted by BigRedFord04
    i did some business w/ a junkyard this summer and was told that he would sell me a complete 44 for $100. A couple other places told me $250-300 for a full one.
    If you could get a front D44 for $100, buy it, you WILL make money.

    A High Pinion D44 with new gears, cleaned up, seals, bearings, hubs all inspected and cleaned should not go for less than $350
    Scott, FTAC '99
    '62 Nissan Patrol 4-seat Twisted Customs Buggy
    '89 "CJ-7" - Her trail rig
    '05 Toyota Tacoma 4x4 TRD - her daily driver...
    '08 Dodge 2500 Mega Cab 6.7 Diesel 4x4
    scott.schubring@williams.com

    The office sucks - I wanna go wheeling!

  12. #12
    ill be your pickup man
    Join Date
    Apr 2002
    Location
    San Antonio, Tx
    Posts
    5,785
    All I want is a fullwidth D44 drivers drop w/ 5 on 5.5. I can do the seals and shafts and brakes etc later. Is this D44 all cleaned up and ready to go? What gears are currently in it? I have seen for a few d44 for sale out of 78-79 Fords in junkyards for $150-$175 in Texas. These of course are straight out of the trucks and have not been "rebuilt" and do not have 4.56 gears. What would you sell the axle for w/o the gears?

    Sorry for the insulting low bid, I am just not clear on what I would be getting.

    Thanks
    92 YJ
    04 F-150 4x4
    11 F-250 4x4

  13. #13
    back in Texas Broncocustom's Avatar
    Join Date
    Apr 2002
    Location
    Tomball, TX
    Posts
    349
    here is the story of the Dana 44. In Septemper of 1999 I replaced all the seals and bearings in the axle plus new rotors and brake pads. In Jan. 2000 I installed a new carrier with a ez-locker and 4.56 gears with all new bearings on the gears. In April I broke the drivers side axle shafts and decided to change to a dana 60. The axle went on a trip to S.A. in September, Moab trip in March of 2000, S.A. trip in April, and Clayton in May. The bearings and seals Has at most 4000 miles on them and most of that is from flat towing the bronco to Moab. The gears have only a few miles on them since they only turn we you are in four wheel drive. I would guess the gears have at most 100 miles on them. I sold the ezlocker but still have the spider gears that I can reinstall.
    '50 F-1 (some day might be a 4x4)
    '10 Expedition EL
    '09 F150 Supercrew

  14. #14
    bigFAWKINranger
    Guest

    james

    still got the 44? if so... would you take $300... when this insurance check comes in, i wanna buy new axles after i pay off my bills and fix my damage.

  15. #15
    No progress... bburris's Avatar
    Join Date
    Apr 2002
    Location
    Dallas, TX
    Posts
    6,336

    Re: cleanimg out garage and house

    Originally posted by Broncocustom
    4 speed transmission (not sure if it is a T18 or T19) mounted to a NP205 transfer case.
    How much are you looking to get for this. I assume it's a Ford tranny and driver's drop t-case...

    I'm very interested if I can get it all for a good price.
    Last edited by bburris; 04-18-2003 at 12:09 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •