cleanimg out garage and house

[fbronco86]

hey james if you get this i want the t18 205 combo we talked about this. thanks mike

[Broncocustom]

Andy the axles are yours. Call me to figure out when and how to get them. Cody told me this last weekend that he does not plan on using the 42" tires anymore and was thinking about selling them, so if you are interested let me know.

Mike the tranny and tcase are yours. Call me to talk about it.

Here is other stuff I need to sell:
-5 - 16.5"x9.75" white wagon wheels that are 8 lug
-C6 rebuilt a couple a years ago but has at most 3000 miles on it.
-np-205 that is currently mated to the c6
-2 -5 point simpson race harness'
-Holley electric fuel pump but I do not remember what it is exactly
-4.10 RR d60 gears used
-Stock d60 35 spline carrier

Make offers on stuff. If you have anyquestion call my cell 713-254-5279

[fbronco86]

Is the output for the tcase on the drivers side?

[BigRedFord04]

is there a carrier split in the D60? if so, which ratios is yours good for? i might be needing one soon for a rear 60.

[Doug Krebs]

how much you want for the wagon wheels and the harnesses?

[Broncocustom]

T-case has drivers side output.
I had not thought about prices since I wwas not planning on selling this stuff. I think the wheels were $50 each new.
I think this carrier only goes up to 4.10 gears. I think for 4.56 gears you need a different carrier but I do not know for sure.
The harness's were $100 each. Make an offer.

[fbronco86]

alright then it should work for me. I will give you a call.

[Broncocustom]

Here are a couple things I have placed on ebay. I will be adding more in the next few days.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425945106

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425944071

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2425945720

[chevsu]

do you still have any elec. fans on the bronco?

[Broncocustom]

Here is the stuff I want to sell:
2- ford power steering boxes
2- Tom woods cv drive shafts (I will find out the length this weekend) each driveshaft cost $400 new
2- stock bronco cv driveshafts
-c6/np205
-t18/np205 (might already been sold)
- 5 white spoke 16.5"x9.75" 8 lug wagon wheels from 4wp
2- simpson 5 point harness's
-Holly red top electric fuel pump
-canister style performance fuel filter
-york a/c compressor
-pressure regultator/ pressure relief/ filter from on board air system
-400 ford engine - whole or any needed parts
- brand new set of auto meter classics gauges, still in box. bought for bronco but never used, cost $300 new
- the lugnut set on ebay
- d60 4.10 gears on ebay
-d60 carrier on ebay
2 - ford 9" open carriers for 31 spline axles also have most the parts to build 2 ford 9" axles
3- electric fans from the bronco

Make me offers on this stuff. I plan on taking apart the bronco this weekend and start taking pictures of parts so that I can post them on ebay.

[chevsu]

what size cv is on the driveshaft? i could be very interested in those and the fans and maybe the york. i will take a look at it after work and see what i could use.

[Broncocustom]

The cv's are only 1330's. I did not want to change the yokes on the t-case when I was building the truck. when you go look at the fans there are 2 on the radiator and 1 on the fuel cell housing in the back.

[aggielr]

how much ya lookin to get for them 9", and what is the wms-wms?

[chevsu]

i am interested in the driveshafts and one fan. but i'm not totally for sure i can use them yet but i would like to try.

[Broncocustom]

The 5 point harness' are now sold.

I have placed a few more items on ebay.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426077045
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426093614
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426095279