I do not understand why F150 has a zero, but mine will rip some sh**! Look out it will have 3.55's!
I do not understand why F150 has a zero, but mine will rip some sh**! Look out it will have 3.55's!
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Originally Posted by Doug Krebs
The squirrels kick ass
Can you explain the scoring for meOriginally Posted by Doug Krebs
scoring...Originally Posted by Matt Conlee
F150 didn't fair so well pulling the blazer, extra engine, some tubing, a dana 60 in the bed, and a couple of other hundred pounds of ****.
I made it 5 miles and couldn't go faster than 40mph. I couldn't get the tongue weight I wanted because my dad bought a gay hitch orginally for the truck and it would have bottomed it out. Also, those trucks have really soft springs in the rear which didn't help anything.
My oldest brother was helping me that day and he just bought a CTD a couple of months ago. He was on his way home at that point but had offered to help earlier. So I went back to the property and he met me there about an hour later. I shifted the blazer forward on the trailer and rearranged the other stuff while i waited.
The squirrels... if you come to the RV this weekend and look in the crock pot you'll find out!
I have pictures, but I dropped my camera about a year ago and it only works with memory cards now. I took the pictures on the regular camera memory and thought there was a way to transfer them to the card, but I can't figure it out.
Work on the 60 starts tonight, I'm going to try and get the kind pins out!
1988 Blazer...RIP
Via con diosOriginally Posted by Doug Krebs
Originally Posted by Doug Krebs
40mph that really sucks
On a side note
I pulled my bronco for the last time this weekend thank god that SOB is heavy.
Originally Posted by fbronco86
why are you thankful for its weight?
Steven W
02 Dodge 2500
82 CJ-7 - sitting in a field...
"....Your theory is f*cked up like a football bat...."
Originally Posted by Snatch Adams
The bronco is at my parents property in Onalaska, Texas. Its also sitting on some kustom red oak jack stands. Its really kinda sad I had a tear in my eye while doing all of this. I am going to sing amazing grace when i get the torch out on it.
And yes I might be the SOB causing the heavy load on my truck
Back to Krebs Thread,
We gonna work on the Blazer this weekend?
I'll be working on it for sure! Can I buy your Dana 60 hub socket off you?Originally Posted by fbronco86
1988 Blazer...RIP
My plan is too park the F150 next to the blazer and stick the axle in between the 2 tires. My work happened to have the correct allen wrench and I plan to just use a long cheater!Originally Posted by AgDieseler
1988 Blazer...RIP
Your smart, so I hope you would put some wood between the tires and the axle.Originally Posted by Doug Krebs
Also dont bite off more than you can chew with this thing. Just remember at 4 o'clock on that friday, my truck is leaving with or without your blazer behind it
Originally Posted by Doug Krebs
Yes for a few keystlopes and a dana 44 socket. Long as project "SS" works out I am down for that.
I will bring it this weekend for ya
or who ever I gave my dana hub 44 socket too give it back.
Last edited by fbronco86; 10-24-2005 at 02:16 PM.