ugly truck

[uglyota]

4 grand obo?
In addition to how it sits right now (new front housing and knuckles, longfields, lockrite, vented rotors and all) you get my other uncompleted projects:
the bent tubing, diamond plate, lights, etc to build a rear cage and I'll show you what I had in mind for it. may need another half a stick or so to finish it out
square tube rocksliders (not your garden variety though...) about 75% fabbed...rear cage is intended to tie into them
mostly fabbed rear bumper/replacement crossmember, also ties into the cage
extra transfer case so you can spend the $300 on an adapter and have dual cases (I'll need a month or so to get the extra tcase to CS)
extra tcase crossmember and metal to make a higher-clearance skidplate
metal, bushings, heim, etc to make antiwrap bar (not wheelable until this is built, since I think the new rear spring packs are pretty soft)
helicoil sets and new gaskets to make the header seal
later model clutch/flywheel set (93 I think? it's got like 20% more surface)
matching spare rim (no tire)
towbar
various spare parts

drivetrain is stock '85/'87 yota stuff with the little extras (hex head drain plugs, heavy duty shifter seat, etc)
about 220k on the stock 22re, about 20k on metal-backed timing kit
header, high-flow cat, summit muffler
rear springs up front with some stock front leafs mixed in, custom dropped spring hanger, budbuilt boomerang shackles
all-pro high steer
schedule 40 (.25 wall) rear driveshaft, front square tube driveshaft
4.10 gears, welded rear end

I will help yank the knuckles apart and clearance them for the longfields (because I couldn't figure it out at 3am after putting 15 hours into it last saturday) but I'm selling because I don't have time for it (and I'm broke), so I'm not going to help work on it.
shoot me a pm or email (ericbranton@yahoo.com) if you're interested or know somebody who might be. It's sitting on Munson between Harvey and University Oaks (behind the Tap).
< pics in the "rig specs" link

[CheapJeep]

I didn't expect this coming after all the work you put into the new front axle, tires, and rear cage. I hope you aren't leaving wheelin' for good.

[CRaSHnBuRN]

He won't be on the boards for a few days to answer questions, but he doesn't plan on leaving the sport. I think selling the truck has been a real hard decision for him, but one he feels is necessary for him at this time

[AggieTJ2007]

yeah, somebody buy this truck

[uglyota]

bump?

[J Cooper]

i dont think anyone in the club could really pay for that..

ask jimmy how you should sell "it"

[uglyota]

yeah i know but if I put "it" "there" I will probably never see it again...

[Sharpe]

I would not pay that much for it only because I refuse to seperate you from it. Keep it, you will regret it if you dont.

[william_ace]

i dont know your situation really... but would 4k help out so much that it will justify you selling ugly and not regreting it?

[uglyota]

it would be a good start...
does 4 grand not seem like a lot of money to you?

[robertf03]

not to me, I spent that on coke this weekend alone.

[DRAGOONRANCH]

you really need to think about switching to Sam's cola, its much cheaper, and they always have it in bulk.

[AggieTJ2007]

I thought about a student loan to buy it, insurance wouldn't be much, but then I figured ide be screwed w/ two rigs and no tow vehicles. and it would be irresponible and a certain significant other would probably shoot me

[Doug Krebs]

I thought about a student loan to buy it, insurance wouldn't be much, but then I figured ide be screwed w/ two rigs and no tow vehicles. and it would be irresponible and a certain significant other would probably shoot me

dang, not even married and getting pushed around

[CRaSHnBuRN]

I thought about a student loan to buy it, insurance wouldn't be much, but then I figured ide be screwed w/ two rigs and no tow vehicles. and it would be irresponible and a certain significant other would probably shoot me

you just gotta learn when to duck to avoid being hit.