Page 29 of 30 FirstFirst ... 19 25 26 27 28 29 30 LastLast
Results 421 to 435 of 439

Thread: Krew Kab Klogger

  1. #421
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    Ordered my driveshaft stuff from Ontario Engine & Machine:

    http://www.ontarioengine.com/

    They had the best price on the shaft/sleeve - $175.65 for the shaft and sleeve

    At any rate, I ordered it a little over a week ago and had not recieved, so I called the number. The owner/manager Vic Logan answered. Super nice guy, he remembered the order just by me saying I ordered a long travel spline and some 1410 stuff. Was able to find it without me even telling him my name. He looked it up, its due for delivery today. I then spent 25 minutes asking him questions that he answered completly. Even gave me tips on how to machine some of the stuff to work. If any of you guys are going to make a long travel, I would use them for parts or the entire shaft.
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  2. #422
    Registered User tommy53002's Avatar
    Join Date
    Mar 2009
    Posts
    709

  3. #423
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    F' that radius armed ball joint 60 pile of parts. Granted his fab is better than mine, but the klogger will out wheel that thing any day. I was going to do a radius arm thing similar to what he did, and for the time the leaf springs took, I am glad I went the way I did.

    And don't forget, Klogger Kab Version 3.0 is coming in 2013!
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  4. #424
    Registered User tommy53002's Avatar
    Join Date
    Mar 2009
    Posts
    709
    Quote Originally Posted by KrazyKarl02 View Post

    And don't forget, Klogger Kab Version 3.0 is coming in 2013!
    Give me a call if you want a hand.

  5. #425
    .
    Join Date
    Oct 2002
    Location
    Poth, Tx
    Posts
    4,913
    Certurion conversion this time?

  6. #426
    Sand Man Shaggy's Avatar
    Join Date
    Dec 2007
    Location
    San Antonio or Victoria
    Posts
    2,337
    That would be awesome if it had a full size bed/ fold down back seat like my dads old truck.
    Jonathan Tate
    361.676.6466
    2010 Dodge Ram 2500 4x4 6.7 MegaCab
    2004 Jeep TJ
    1992 Jeep YJ
    2008 Jeep JKU
    2013 Ford Explorer Sport (mama's go fast car)

  7. #427
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    Got my driveshaft made. Picture here shows the parts, Starting from top right, going left 1) 1350 weld yoke, 2) piece of 2.750" 0.250" wall DOM tube, I had to ID bore the tube on my Dad's lathe to make it fit the yoke, 3) Splined sleeve that I turned the OD and cut in half, this acts as the bushing between the tube and splined shaft. I welded the splined yoke to this piece and then this piece to the tube.

    Next middle level is the Neapco shaft (part 4) and sleeve (part 5) listed in posts above. The splined section is 25" long, the sleeve is 6", it is made on the far left side to fit a smaller tube, but I used the larger diameter and turned it to fit in the tube.

    Bottom row: 6) more of the 2.75" X 0.250 tube, I had to turn the OD down on the end of this, the wall was like 0.180 when I was done finally 7) is a 1410 weld yoke, I bored the ID on the mill to fit the OD of the turned section of tube.
    Attached Images Attached Images      
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  8. #428
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    Finished product, at ride height 39.25" long with 7" up travel slip, 10" down travel slip, 1410 yoke on T-Case side, 1350 on axle side. Welded together on the highest setting my mig will go to.....Name:  Northeast Harris-20121205-00086.jpg
Views: 511
Size:  48.1 KB
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  9. #429
    Chubby Bunny davido's Avatar
    Join Date
    Mar 2002
    Location
    College Station, TX
    Posts
    4,244
    Pretty slick! So under $200 for all of it?
    The disco ball in my mouth, insinuates I'm ballin'

  10. #430
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    Quote Originally Posted by davido View Post
    Pretty slick! So under $200 for all of it?
    Ha! under 200 for the slip shaft and sleeve....
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  11. #431
    .
    Join Date
    Oct 2002
    Location
    Poth, Tx
    Posts
    4,913
    You know you wouldn't need that **** if you just put a proper suspension under it.

  12. #432
    Like my rock crawler? KrazyKarl02's Avatar
    Join Date
    Jun 2005
    Location
    Krazy Krosby
    Posts
    4,169
    I am pretty sure proper suspension will not fit under the giant Ford cross member, I had to clearance it a lot for hydro-assist.
    -Karl
    2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
    1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
    1965 Chevelle
    1975 Corvette

  13. #433
    Dead or alive... mudtoy67's Avatar
    Join Date
    Nov 2002
    Location
    Tx
    Posts
    4,545
    Quote Originally Posted by eight View Post
    you know you wouldn't need that **** if you just put a proper suspension under it.
    TTB?
    BDR

  14. #434
    Chubby Bunny davido's Avatar
    Join Date
    Mar 2002
    Location
    College Station, TX
    Posts
    4,244
    The disco ball in my mouth, insinuates I'm ballin'

  15. #435
    Rawr TexTJ209's Avatar
    Join Date
    Sep 2004
    Location
    Waco, Tx
    Posts
    3,606
    Quote Originally Posted by davido View Post

    King Krew Kab Klogger?
    '73 J2000 Thriftside Gladiator, 258/T14/D20
    '81 CJ7 Laredo, 258/T176/D300

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •