no, it would be bailing wire and jb weld, if he did a high class job on it
no, it would be bailing wire and jb weld, if he did a high class job on it
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
No, I actually got the mig out for this. In the garage it is easy, any other time it would have been silicone....
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
weak
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
I splurged and put new calipers on the front, they were $15 each. The old ones bleader was screwed up, so I figured what the hell. Also a picture of the power steering fluid crapped out on the ground.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Later I decided the klogger needs some thump. I mentioned earlier I had purchased a hi performance radio with 4 speakers (it cost $85 total plus shipping, very performance....) I was faced with a problem. I wanted outside speakers plus inside ones. Also I wanted to be able to turn the outside speakers off, so I went to work.
I cut these holes in the back cab and made some kustom speaker boxes.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Next I installed the kustom boxes and speakers
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Finally I put the head unit, the 2 chrome switches turn the outside speakers off.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
on the calipers did you get the ones with the steel piston or the ones with the craptastic phenolic pistons where they melt and get stuck
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
They looked steel, but I did not know there was a difference. They were the cheapest O'reilly's had. I have a Dana 60 for the front, just not sure when I will put it in, so I am not concerned about the TTB lasting forever. I had to replace the calipers because stopping was sucking and I did not want to do a reverse Fred on any hills in Clayton.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
look at the part number on the box, if there is an s behind the number then they are steel, more than likely they were the phenolic ones
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
Seems the phenolic are pretty common and would be fine unless they are getting heavy duty use.
Seth Stewart '04
2000 Suburban DD
1995 F150 SAS - Needs more work to sell
1998 GMC pickup - sold
2003 Yukon XL - wrecked/motor donor
1975 Scout - TBD
1976 Scout - parts truck
1972 IH 1310 dually - TBD
196? Scout 800 - 302 roller
Looking on O'Reilly's site I would say they are phenolic. I don't think it will be an issue, the Klogger is not a street vehicle.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Nitro Express ride round 2!
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
I will load it full, and empty it into my belly....
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette