Krew Kab Klogger

[fbronco86]

This was some of the weekend fun. Then I got a black eye. Everyone at work thinks I got beat up so I used the old line you should see the other guy.

[KrazyKarl02]

Got some shat done today, I fixed the F250's brakes (turned rotors and new pads, the biggest challenge was convincing the idiots at O'reilly's that they could turn the rotors) I also changed the oil.

Figured out what was wrong with my brake controller, the dumba$$ who had the truck before me wired the brake wire into the center pin on the trailer connector (this is supposed to be for 12 volt supply to the trailer) fixed that and mounted the controller up, works like a champ

I also cut the winch off my trailer, now I need to weld it to my square tube I will use for a reciever hitch. Probably do that tomorrow, as it is getting dark and cold and I have some night life to go see in Beaumont tonight. I am also going to weld the above front box/bumper in tomorrow.

Then it should be ready, except for the front drive shaft. I ordered a good used one from ebay, but it has not come in. If not I will just run the one it has, though it will make some noise. Oh I might also look at mounting the suburban seat.

[fbronco86]

Got some shat done today, I fixed the F250's brakes (turned rotors and new pads, the biggest challenge was convincing the idiots at O'reilly's that they could turn the rotors) I also changed the oil.

Figured out what was wrong with my brake controller, the dumba$$ who had the truck before me wired the brake wire into the center pin on the trailer connector (this is supposed to be for 12 volt supply to the trailer) fixed that and mounted the controller up, works like a champ

I also cut the winch off my trailer, now I need to weld it to my square tube I will use for a reciever hitch. Probably do that tomorrow, as it is getting dark and cold and I have some night life to go see in Beaumont tonight. I am also going to weld the above front box/bumper in tomorrow.

Then it should be ready, except for the front drive shaft. I ordered a good used one from ebay, but it has not come in. If not I will just run the one it has, though it will make some noise. Oh I might also look at mounting the suburban seat.

Night life in beaumont huh. You going to wild bills

[fbronco86]

This came from work like this for Karl. I guess his co-workers know something that we dont.

[jerryg79]

This came from work like this for Karl. I guess his co-workers know something that we dont.

what?

[KrazyKarl02]

I think Mike is trying to be funny again. He is implying that my co-workers wrote that crap on the truck.... but what really happened is Louis's brother Jose wrote that on there. I might add the felatio portrait was quite good, I think he might have some experience with that up close, if you know what I mean.... Mike is just jealous, you see no one will right things like that on his EB. It's just implied if you own an EB you are obviously homo gay.

[fbronco86]

Karl has alot of pics to post on this. The pictures will explain alot.

This weekend we took the cab off and put the crew cab on. I did some kustom body slamming on this truck to make the body sit lower on the frame. It looks pretty sweet.

We also have a 302 FI motor to go in place. If karl would buy my dana 60 from me it would be pimp.

The name has changed

"Krew Kab Klogger"

[CRaSHnBuRN]

The name has changed

"Krew Kab Klogger"

KKK

[Sharpe]

Whad yall do about the bed?

[william_ace]

pics pics

[KrazyKarl02]

The day started by removing the old F-150 regular cab. Mike found out how the steel mill guys decided to combat rust, they fiberglassed the floor of the cab

Third pic is when we wheeled it out and just pushed the body off

4th pic shows how white trash my yard looked

5th pic is staging to put the crew cab on, We put the crew cab on kind of reverse of taking the old cab off, only we used my 8000lbs winch to yank it on. I have to give my buddy Jason Jones credit, this was his idea and mike and I did not think it would work, but it did.

[KrazyKarl02]

We took the doors and seat off the new F350 cab.

PIC 1 - Here we have the body on, we had to do some "minor" torching for clearanceing.

PIC 2 - Here Mike makes some of those minor adjustments

PIC 3 - Then we had to do a bit of a body drop in the rear, so we had to cut some of the body, I checked and in a car show, this will not count off for originality points.

[Doug Krebs]

****ing sweet... I always get shotgun!

[fbronco86]

****ing sweet... I always get shotgun!

I think not you are a karl's suedo friend

[Doug Krebs]

I think not you are a karl's suedo friend

What?