i need a 80-96 bronco or f150 box
i need a 80-96 bronco or f150 box
Ryan Clarke
(214)695-7901
Go To Advance
Seth Stewart '04
2000 Suburban DD
1995 F150 SAS - Needs more work to sell
1998 GMC pickup - sold
2003 Yukon XL - wrecked/motor donor
1975 Scout - TBD
1976 Scout - parts truck
1972 IH 1310 dually - TBD
196? Scout 800 - 302 roller
what happened to yours?
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
cant get the mother ****ing pitman arm off, ive broken two pullers and still nothing. i see it as less of a hassle to just find a used one so i can finally finish this god awful piece of **** finished
Last edited by RCcola55; 07-27-2006 at 03:14 PM.
Ryan Clarke
(214)695-7901
I'm sure you have done this, but just to be sure. The key to a pitman arm puller is to tighten it, by hand, until it is really tight. The next step is to tap on the arm, not the puller, with a hammer. If it doesn't yield, try some PB Blaster, then some heat. I think the key is to definitely tap on the arm after the puller is tight, then re-tighten. Hell tighten it up and get it tight then leave it overnight. Which part are you trying to salvage? The box or the arm?
Boats and hoes
Stumble in to the liquor store
With a dollar-fifty for a bottle of wine,
I know just what I'm lookin for
Thunderbird will do just fine.
I HAD THE SAME PROBLEMS GETTING MINE OFF. DO LIKE JIMMY SAYS. I DIDNT USE ANY HEAT AND I GOT MINE OFF, SAME BOX. MAKE SURE YOU HAVE A PULLER THAT IS MADE FOR WHAT YOU ARE DOING. I TIGHTENED MINE DOWN REAL HARD BY HAND, THEN HIT THE ARM, THEN TIGHTENED SOME MORE, HIT AGAIN, AND IF I MEMBER CORRECTLY IT PULLED LOOSE AFTER THAT. IF YOU WANT A HAND GIVE ME A CALL AND I CAN SWING BY.
Seth Stewart '04
2000 Suburban DD
1995 F150 SAS - Needs more work to sell
1998 GMC pickup - sold
2003 Yukon XL - wrecked/motor donor
1975 Scout - TBD
1976 Scout - parts truck
1972 IH 1310 dually - TBD
196? Scout 800 - 302 roller
sorry
Seth Stewart '04
2000 Suburban DD
1995 F150 SAS - Needs more work to sell
1998 GMC pickup - sold
2003 Yukon XL - wrecked/motor donor
1975 Scout - TBD
1976 Scout - parts truck
1972 IH 1310 dually - TBD
196? Scout 800 - 302 roller
i have a box, but i dont know how good a shape it is in.
92 YJ
04 F-150 4x4
11 F-250 4x4