ive got a sye that you can have for cheap if you need one
ive got a sye that you can have for cheap if you need one
Originally Posted by afroman006
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
is it the hack and tap or is it the shaft and all for the sye
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
it is the shaft, output housing and yoke
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
well i figured out why it had a rattle/knock, it turns out that the bolts that i had for the torque converter were too long and bottoming out and letting the flex plate move, so i added some lock washers and it cured the problem, but i got my brother to pick me a set of factory ones from jeep, so they are on the way to me
i also cut away the rear quarter panel, installed the grill, installed a tranny cooler (plate style), put the cowl back on and wipers on
just need to weld rear still, finish trimming rear fenders, make bumpers f/r, sliders, and adjust the front axle to get it centered all the way
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
i got the sliders/frame stiffener made and bolted on, made out 2" x 1/4" wall square tube the frame stiffener is made out of 3" angle 1/4" wall
rear bumper made and put on, made out of 6" c-channel with 2 1/2" sq tube 1/4" wall that wrap around the side towards the fender wells
and trimmed rear fenders and spot welded them back together
things left before clayton: make front bumper, weld rear, and adjust track bar and it should be ready
i have pics, but are still on camera, i will post them up later
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
here are a few pics of the progress
time to go finish this thing up
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
Nice!
clean work, me likey.
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
looks good, but why blue? was that paint left over from the Robbie's Papa Smerf axle?
Nick
'76 F250 High Boy
'87 Wrangler
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
important observation
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
blue, why not
it dont need no muffler
got the front bumper done today, just leaves weld rear, make battery tie down, and adjust track bar
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
don't you have tests or something???
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
yes thats why i have had less than 6 hours of sleep in the last two nights and am running on adderal and 5 hour energy shots. **** you
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
today i changed the flexplate bolts back to the factory ones, welded the rear, and tried to adjust the front track bar over but couldn't
Tommy Matheaus '06
210-323-2546
2004 F-140 4x4 DD
1990 F-150 4x4 in the works
1992 Jeep Cherokee basterdized
Posting Permissions
Reply With Quote