FS: Toyota Tom Woods Drive Shafts

[8Runner]

Lifetime Warranty Tom Woods Custom Driveshafts

These were setup for my NP205 Transfer Case, but could be modded back to stock Toyota locally or by Tom Woods. Each come with a spare U joint

Both have Double Cardan (CV) joints and the front is long travel

Front: $350 obo (Cost me ~$700 +$75 for warranty)
Rear: $250 obo (Cost me ~$500 +$75 for warranty)


Front:

Rear:

[colman]

i would love to but i don't have that much scrill laying around

[CRaSHnBuRN]

the stocker is a toy CV, right? (for some reason it looks different to me, but that may just be the pics) If so, I'll take it

[agjohn02]

the stocker is a toy CV, right? (for some reason it looks different to me, but that may just be the pics) If so, I'll take it

those other two would go nicely between a d300 and toy axles, would they not?


those are 1310 cv's arent they?

[8Runner]

the stocker is a toy CV, right? (for some reason it looks different to me, but that may just be the pics) If so, I'll take it

Yes, as far as I know. I leave Tuesday for CO for a week so email or call me about a time to meet.

those other two would go nicely between a d300 and toy axles, would they not?

those are 1310 cv's arent they?

Honestly, I have no idea. Come check 'em out.

[CRaSHnBuRN]

Yes, as far as I know. I leave Tuesday for CO for a week so email or call me about a time to meet.

I'm super busy this week, with no real spare time to speak of. Could I get it from you when you get back?

[CRaSHnBuRN]

those other two would go nicely between a d300 and toy axles, would they not?


those are 1310 cv's arent they?

haven't decided if I'm going to go the D300 route, or stick with dual toy cases (easier, cheaper and a whole lot less work). Either way, those driveshafts are well out of my price range, and they would still need to be changed as far as length goes

[colman]

i'll give you 100 for the rear, ya know us poor college kids and our empty pockets

[8Runner]

i'll give you 100 for the rear, ya know us poor college kids and our empty pockets

Yeah, I know, that's why I posted 'em here first for cheaper than I could sell em on pirate or ebay. Buy both & I'll cut a little better deal, but $100 is not close...

[colman]

thats what i figured but you can't blame me for trying, on another note are you done with my wrenches yet?

[8Runner]

Actually, I should be done with them tomorrow. I never could find that bolt you took off from the bottom of the winch so had to go buy one today. I'll leave 'em on my workbench in case I miss you.

[J Cooper]

whoever buys my truck can buy these from him and have the lengths adjusted

[colman]

sorry about loosing your nets and bolts, i'm usually prety careful

[8Runner]

NP, they are probably around - just got tired of looking.

[8Runner]

Stocker is sold, but the woody's are still available.