I'll play with it tomorrow but it is really close to the back of the pumpkin as it is.
I'll play with it tomorrow but it is really close to the back of the pumpkin as it is.
Originally Posted by jerryg79
Steering solution.
Parts list:
-1.75"x6.75" single ended ram kit
-Modified psc gear box for cylinder assist 25/76 metric gear w/ 13/16 input
-1400X series pump
-6.5" remote reservoir kit
-1300/1400 series pump retrofit bracket for 5.0 Ford Mustang pump bracket
-Modified stock pulley
-12" heat sink cooler kit -6 fittings
-Cylinder hose kit w/ 4-90s 6' of hose
-6 x 18mm x 1.5 0-ring adapter
-(2) A2 #6 field servicable 90 degree
-(3) A2 #6 high pressure hose LG OD
Last edited by 85cj7; 10-10-2011 at 06:35 PM.
did you buy the ram seperate?
...
No, it's psc just forgot to list it. Thanks for pointing that out.
is it the 1.5" 8" travel ram?
I see the edit now. How did you decide 6.75" ?
Last edited by robertf03; 10-10-2011 at 07:01 PM.
...
Before I tore it all apart I found the axle center-line and marked it with a chalk line then I pulled the wheels to full lock right and marked a chalk line on the tie rod that matched the axle center-line mark. Then I pulled the wheel to full lock left and marked another chalk line on the tie rod that matched the axle center-line mark. Then I measured the distance between the two chalk lines on the tie rod. It was exactly 6.75" throw. I was just lucky in the respect that PSC has a 6.75" throw ram. Because you want the ram to be the limiting stops in the system it worked out perfectly, otherwise I would have had to run the 8" stroke ram and have added internal stops.
I wanted to change the look of the cage up a bit so I added a bar running across the top of the each wheel well and a double B pillar with some small 'rungs'. I have always liked the look of the double B pillar and it adds some uniqueness.
New D-44 3/8" cover
$5 worth of black clothing dye makes a huge difference on the harnesses.
Did you buy a weld it yourself kit or did it come welded?
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
It came as is. Don't know the brand. It was a $40 eBay impulse buy.
Does it leak?
Born to Kill
I just watched a spider dominate a fly on the wall outside, i thought would would travis do? and i did the opposite, spider lives!
It's been on for over a month with no signs of leaking or weeping.
I got some custom cowl armor made up for the cj and bolted it up last weekend. It covered up the dent in the cowl from the last flop nicely.I will add some tube and extend it off the fenders and tie it into this new cowl armor plate. It is 3/16" with (10) 5/16" countersunk stainless bolts, just like the rest of the jeep.
Again, trying to stick with the 'unique' look. I'm not a fan of the new two-tone paint scheme. But that should change soon.
Most recent off-roading trip compilation from last weekend.
http://www.youtube.com/watch?v=qy1uy...=youtube_gdata
Posting Permissions
Reply With Quote
