Disco

[85cj7]

I have a 1.75"x6.75" PSC and love it.

[AggieTJ2007]

I think you would be fine with the 1 1/2 ram but if want smaller you should call PSC I am pretty sure they can make one for you.

This is probably more along the lines of what you need
http://www.surpluscenter.com/item.as...name=hydraulic

[Shaggy]

I'm running an 8" with no stops but it bottoms out on my diff cover. Most people I know that run the 8" have to have stops

[robertf03]

I based it off steering stabilizer length, I haven't measured how much it actually uses.

Karl, the box has a piston with a rack on it so it has a similar force imbalance when turning left or right. This may bring it back to neutral.

[KrazyKarl02]

I'm running an 8" with no stops but it bottoms out on my diff cover. Most people I know that run the 8" have to have stops

WTF did you just say?

[DRAGOONRANCH]

WTF did you just say?

[robertf03]

This guy put a pump off an E150 on his Disco. Same pump that Jeeps and some other stuff used so it should be cheap.

[KrazyKarl02]

Same pump that myself and JB run.

[robertf03]

Does it keep up with your ram? I don't think the zf or tc pump has a high enough volume/rev. Anyone know if that data is published anywhere?

[KrazyKarl02]

Seems to, but mine is only a 1.5" ram.

[TdmayfieldIV]

I don't see why a 1.5" ram is too big. The kit that psc sells for jeeps is 1.75". Most of the ultra 4 guys are running 1.75", and they need responsive steering for the go fast stuff. If rover axles steering sweep is not 8 or 6.25 psc can make you a uhmw internal stop, or you can make an external one. I had vilas machine me one for mine.

I'm running an 8" with no stops but it bottoms out on my diff cover. Most people I know that run the 8" have to have stops

remind me not to wheel with you............but take video

[Sparling]

That looks like a saginaw pump. Pretty much everything used it at some point, I'm sure the data for it is posted somewhere.

[RCcola55]

The e150 pump is a Saginaw pump, just with a ford mounting pattern. They are also easily modified for larger volume and higher pressure, you will need a reservoir though, to keep up.

A 1.5" ram will be fine, but I bet you will find that it may not be enough at times.

[redcagepatrol]

we use a 2.25 x 8" on Lynda's with stops. I have a 2.25" x 10" for my new rig with 50 degree steering. It will have internal stops. Use the same pump, plenty of flow, almost too fast.

[KrazyKarl02]

I have a 1.5" X 6" ram with the saginaw pump and do not need the additional reservoir. It is close but works.

Tommy, that is not a UHMW stop, that is a piece of brass.