i need a set of spindles that are 6 bolt to convert my waggy front d44 from 6 lug to 5x5.5. i was told that 74-77 jeep d44 will work. i have a set of 79 rotors that can go with the deal if that helps as well as the spindles that i have that work with said rotors. any help anyone?
i also have seen that 77 and earlear ford spindles as well as chevy. anyone have any
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
just redrill them
Originally Posted by afroman006
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
what's that gonna run me
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
Cheaper than what your wanting to do. prob bout 10 buck a rotor if that
You'd be better off turning the OD down on the spindle rather than drilling the hub and rotor. I think Matt Conley had his redrilled at Sunray, I don't know what he paid but I know it wasn't 10 bucks.
...
any one have a ford spindle that i could barrow to turn mine down so they match up?
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
yeah i've got one off of a 78 d44
can i barrow it, or if you have 2 what do you want for them
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
yeah i have 2 but i wanna keep the axle together
you can borrow it whenever as long as i get it back. just pm me for directions if you want
you do know that ford spindles are shorter and 5 bolt instead of 6, right? outside axle shafts won't work.
buy the correct bearing, measure the ID and have vilas turn the spindles down
Last edited by robertf03; 01-28-2007 at 04:43 PM.
...
borrow?
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
...
i needed to barrow them to see if they are what i want and he ended up having some from a bronco that i got that look like they are gonna work. also got slotted drilled rotors to go with them. the spindles are 6 hole like the waggy not 5 fyi
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
Doh!
the ford spindles are 1/4 inch longer. i'm going to assume that is a big deal. is it or can i make it work
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
Posting Permissions
Reply With Quote