Bronco Build Round 2

[bburris]

Don't know if you need body parts, but here are some about 20 mins away from my apt.

http://dallas.craigslist.org/pts/408490461.html

[fbronco86]

Don't know if you need body parts, but here are some about 20 mins away from my apt.

http://dallas.craigslist.org/pts/408490461.html

My body is pretty straight. I will keep an eye on that add if he comes down in price I might think about it.

[fbronco86]

I started chopping up the old wiring harness. I am removing alot of stuff most of which is related to the old charging system. It was grounding out on the inner fender which is probably why I could not get a full 12 volts while I was cranking. Plus I found some resistor wire which was not helping either.

[BMFScout]

I started chopping up the old wiring harness. I am removing alot of stuff most of which is related to the old charging system. It was grounding out on the inner fender which is probably why I could not get a full 12 volts while I was cranking. Plus I found some resistor wire which was not helping either.

You should get a mechanic to look at it!

[fbronco86]

who had those 33's up in dallas?

[85cj7]

i have 3 of them

[fbronco86]

Here is a photo of the wiring kinda hard to see but you can see the green goodness.

[fbronco86]

I am pretty sure I dont need any of this wiring.

[fbronco86]

I got most of the dash stuff figured out. My main concern was to get everything clear of the underdash a/c system. This weekend I plan to start cutting some wires.

[KrazyKarl02]

Where you drinking while you did this? I seem to remember a pile that looked like that in Beaumont....

[mudtoy67]

I think that is similar to the first time I ever met Mike. We were putting the carb on Jerry's bronco and supposedly he was the one that knew how to do it. First thing he does is grab a handfull of vaccum lines and yanks them out saying "oh, we don't need all this crap." In the end, everyone else is trying to finish putting the carb back on, and mike is leaning up against the tire drunk as hell and eating axle grease w/ Krebs.

Some things never change huh?

[fbronco86]

Where you drinking while you did this? I seem to remember a pile that looked like that in Beaumont....

I am out of jim beam at the moment.

[KrazyKarl02]

Mike's not a member anymore, but he wanted me to post up some pictures...

[mudtoy67]

That thing came out nice.

[redcagepatrol]

holy crap! nice!