Bought my 94 dodge and found out last week my passenger side ball joint is worn out bad. The driver side seems okay but would like to get all of them at once. So can i use your drive way sharpe??? And i need someone to help me?? Ill buy a couple cases offor everyone who helps. It will be a few weeks before i can do it though because of money. Has anybody done this before?? Is it that hard???
coop, ryan and i had to do it to one of the axles i bought at the end of the summer. You have to remove all the brakes, the hub, spindle, axle shaft and knuckle. We couldn't get the old ones out because they require a massive amount of pressure to press fit in and out so you have to have cardock do it, i think coop payed 40-50 a side. not including the new upper and lower ball joints themselves. not as hard as it is time consuming. I'm sure you can use the driveway but you better hurry before the clayton rush and everyone will be over here doing stuff. Including me.
Yah thats fine brah.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
when i did the ones in the blazer with brian we just beat it out with a big hammer and then used a ball joint press ( you can get from any auto part store on loan) to put them back in or they go for about 40 at harbor freight and you can also use them to do ujoints
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
where did you have it done at for 50 a side??
save the money and buy the tool to do it your self
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
the place is called cardock, its in the same building as advance on texas and harvey.
i have one that you can use or cox has a press that would probably be cheaper
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
when i did the ones on the blazer they just popped out(about 5 minutes of pounding with the bfh each), but if they are rusted in they would be a ***** to got out
I have a 20 ton hydraulic press if whatever the BJ's are pressed into is removable.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
50 bucks, what a ripoff.
okay then will yall help me replace them. ill try to see if i can get the money together pretty quick
i'll probably be able to.
I will admit, this group can really come together to get some **** fixed for folks. I would like to take this time to thank everyone for their patience and help on all of my POS rigs.
Originally Posted by Fredo
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
I will admit, this group can really come together to get some **** fixed for folks. I would like to take this time to thank everyone for their patience and help on all of my POS rigs.
I cant agree more. And as a new guy i just want to say thanks for jumping in and helping me on everything without even knowing me. I owe all of yall big time. Thanks guys!
Posting Permissions
Reply With Quote