getting a big boy goose neck?
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
"It's not cheating if you pay for it"
tiger trailers in mt pleasant makes a 26ft gn with 7k axles and drive over fenders like mine. one of the profs in my old dept at a&m bought one while i was there. paid 4k.
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
If i were you I would look at PJ trailers, they make a "C8" Carhauler goosneck that come in lengths from 20-34', has dual 7,000 pound axles, 8" channed and is 2,000 pounds lighter than the one I bought. saw one in person and they are perfect for one fullsize and a couple 4 wheelers, or side by sides.
http://www.pjtrailers.com/detail.cfm?ID=C8
Also many custom options.
Cool
I have not decided on what I want to do yet, if anything.
What about deck over vs low boy?
What about sides?
Ideally I want to be able to use this trailer for more than just hauling rigs, hopefully to move some equipment one day. Nothing stupid heavy. I only want 2, 7k or 8k axles.
Deckover just puts the rigs up so high and the only real advantage I can think of is if you are loading items on the trailer with a forklift, obviously a deckover is better since you do not have to worry about the fenders. Unless the design of a deckover is inherintly stronger? O, and beer pong, deckover definetely better for beer pong
A lowboy, extrawide like Cooks, in the 30-34' range seems about right.
Would want slide in ramps versus the fold up too.
What about a GN hitch that won't drop my exhaust to the ground or cost a small fortune?
92 YJ
04 F-150 4x4
11 F-250 4x4
this one is only 24' but I think you can get them longer
92 YJ
04 F-150 4x4
11 F-250 4x4
I had a longer post but you should look at a B&W turnover ball
http://www.sdtrucksprings.com/index....oducts_id=8098
looks like you may be to drop the exhaust but I bet you could clearance it with a hammer or get an exhaust shop to add a bend to clear the hitch.
Originally Posted by afroman006Originally Posted by afroman006
PJ makes good trailers, My dad has a tandem dual 32' deck over with a 4' dovetail, and it is a beast. He says it is the best trailer he has ever owned. Plus they are made right outside of Paris
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
"It's not cheating if you pay for it"
I should have listened when I bought mine. Mine is 25+5 foot dovetail, perfect for two tigs. The ideal length like Sam mentioned is 32' for 2 7000 axles, anything longer and you need tripples, and all i have heard about people with triples is terrible things related to tire problems
You had mentioned the idea of bobcat down the road, still a perfect size for that and plenty of room for attachments up front.
BTW, aftermarket exhaust does not require a drop bracket like the factory setup when using a B&W.
Last edited by Hellbent; 04-17-2012 at 06:07 PM.
I still think you should have went duals on your trailer Evan
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
"It's not cheating if you pay for it"
I have a matching PJ with duals 24,000 pound rated, its my new sprayer trailer with a 2,000 gallon tank on it. This weekend it had roughly 8,000 pounds on the trailer, people haul bobcats all day with singles and bobcats weigh 10,000.
I was going for a more lightweight heavy duty trailer that i could still pull at 80mph.
http://sanantonio.craigslist.org/grd/2948614802.html
I like this, but think he is way high on his price.
92 YJ
04 F-150 4x4
11 F-250 4x4