larger demand = easier to come by most likely. As for steering, I would say .25 wall or thicker. 1.5x.25 would probally be good since you can get 3/4-16 (heim) and 7/8-18 (1 ton TRE) weld in bungs with a 1 inch OD just about anywhere
larger demand = easier to come by most likely. As for steering, I would say .25 wall or thicker. 1.5x.25 would probally be good since you can get 3/4-16 (heim) and 7/8-18 (1 ton TRE) weld in bungs with a 1 inch OD just about anywhere
when i got my 1.5 in with .25 wall it for my steering it was like 6 dollars a foot. to give some of you all a decent idea on price.
He who dies with the most **** wins, after seeing your collection you are in the lead no doubt!
hmm, looks like i'll have some nerf-bar-esque sliders if i go that route. when do you need money?Originally Posted by AggieTJ2007
what are you planning on doing with the 1.25 Doug?
garrett, do you have enough room to store this in your garage? This stuff rusts fast if left out. Remember you can lay it under a rig if need be.
Creighton, I'm in for a 100 ft. Just let me know when you need the money. I'm thinking its time for a bending party
Who knows? I was just going to get 40ft of it for whatever. Probably not at that price though. Probably make good grab handles, misc. mounts, dash, etc...Originally Posted by CRaSHnBuRN
It fits in my garage.
1988 Blazer...RIP
What about my 2" .100 and .120 wall creighton?
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
if ya need help getting it, let me know
Originally Posted by CRaSHnBuRN
yea, im not sure on my garage dimensions, but if it wont fit lengthwise, ill just throw it up in the above the garage
I will let you know on the prices tomarrow.
Let me give them a call tomarrow when they are still open
Originally Posted by afroman006Originally Posted by afroman006
Let me know what the 1.5 x .25 is too, might need a little too. Mark me down for 20' of the 1.25 DOM also
ok
Originally Posted by afroman006Originally Posted by afroman006
**** 1.75 is almost $2 a foot cheaper than 2". If I ultimately buy 150' of tube that much savings would pay off a new die for my bender...cause I have a 2" die but no 1.75". Hmmmmm...
When are you making this order?
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
whenever people make up their minds on what they want. If I get definetive answers and some money I will place the order
Originally Posted by afroman006Originally Posted by afroman006