I traded Cox some parts for some welding so the wheels are all done and ready for paint and mounting. Thanks alot.
I traded Cox some parts for some welding so the wheels are all done and ready for paint and mounting. Thanks alot.
92 YJ
04 F-150 4x4
11 F-250 4x4
Got this in the mail today. It is for my F150. Due to the hidden style design, you have to pop the hood to hook up the controller, which is kinda a pain.
The panel is a little bigger than I expected, but it really is of nice quality. I am going to mount it to the left of the column and a little bit down, so it wont be to obvious.
92 YJ
04 F-150 4x4
11 F-250 4x4
..
92 YJ
04 F-150 4x4
11 F-250 4x4
I went with blue "metal speck" paint. It matches fairly well, but I havent seen them in the daylight yet. Mounting this ****ers is hard work. The overall combo is almost 150lbs.
92 YJ
04 F-150 4x4
11 F-250 4x4
looks b!tchin
Originally Posted by Fredo
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
The hole for the valve stem didnt feck up the ballancing?
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
from the run to 47 last sunday...
92 YJ
04 F-150 4x4
11 F-250 4x4
Balancing? No balancing on this rig....I ran it up to 30-40mph, and yeah it might shake a little bit, but I am not trying to drive this thing expcept onto the trailer
92 YJ
04 F-150 4x4
11 F-250 4x4
A front bumper/winch and Redeck ram are next on the list, but hte new trailer put a hold on that for a while. We are planning on the Halloween run at Shiloh on Oct. 20 though.
92 YJ
04 F-150 4x4
11 F-250 4x4
If anything it might help. You should see all the weights, courtesy of discount's free rotate and balance, on my wheels and they're still out of balance. Every now and then they'll wobble a tad at around 65-70 but not bad.
The gray and blue on the wheels looks sweet
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter."
'69 FJ-40, chevy383, sm420, 37's, RedNeckRam
'08 Tundra SR5 Poser Douche Rig on 35's
those look bangin'. i missed the post when you first got them done. been wondering what was keeping you.
you should see all of the weights on the inside of my wheels, one of them has almost 1.5 lbs on the inside of it
but they didn't vibrate at all at 75/80 mph
Last edited by AggieTJ2007; 09-29-2007 at 10:13 AM.
Creighton, you have done stuff with that jeep that would make a goat go "holy ****!"
are you running an internal beadlock. i can't decide whether i want to cut down the magnesium ones or get pvc ones fpr my h1's
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
I am running the inserts from USA 6x6. They are plastic. WHeeled them hard this weekend at 8psi. and never had a problem.
92 YJ
04 F-150 4x4
11 F-250 4x4
If you're worried about the beadlock then your tires aren't big enough.
The disco ball in my mouth, insinuates I'm ballin'
Posting Permissions
Reply With Quote
