How about some pics too???
How about some pics too???
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
Thats how the pump came plumbed to us. Had 1" and 1.25" tubing that was bent.Originally Posted by KrazyKarl02
1988 Blazer...RIP
You have not taken fluids yet? You should know that ****.Originally Posted by Doug Krebs
So it works! Although not my hydraulic pump, it bends tube. The pressure gauge read 600psi at the start of the bend on 1.75" x .120 wall hrew.
Only bends about 100* in one shot because of the offset configuration I have. It also flexes the C channel a little.
I'm probably going to make new extended arms out of 1/2" and solve that problem. This will be after bending the tube for the press.
Anyone want to buy some bender arms?
1988 Blazer...RIP
It lives under it's own power 4 years later! Whats next the corn?
Last edited by Doug Krebs; 11-28-2007 at 12:15 PM.
1988 Blazer...RIP
ready to help me with the cage yet?
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
I may need to "rent" it from you when I get home in April to try to get the rest of the tube knocked out before TCC.
The valve and pump are now mounted. I need to mill a flat on one of the bolts and buy a steel electric box and mount a switch. Other than that it's done. It's also much faster than I thought.
1988 Blazer...RIP
that looks sweet. thats a big cylinder. how thick of wall stuff are you bending again?
None of my expensive stuff will ever go back to the barn...Originally Posted by Snatch Adams
John, the old stuff we were bending was a little under .2 thick.
I'm not sure what the new stuff will be.
1988 Blazer...RIP
looks slick. how much do you have invested in it?
1976 F-100 Kustom Krawler
1976 F-150 Custom
1964 CJ5
don't really want to think about it. More time than anything.Originally Posted by RCook527
1988 Blazer...RIP