Maybe I am calling it the wrong thing. I am building a ladder bar to keep the axle hop down since I have the 56" springs up front now.
Maybe I am calling it the wrong thing. I am building a ladder bar to keep the axle hop down since I have the 56" springs up front now.
anti-wrap bar would be the word bushing ok for that. a tracbar is what some wrongly call a panhard bar. a track bar is on drag race 4 links from the axle housing lower to the frame side lower on the opposite side to take care of side to side location.
I ordered the pro comp ones. They fit very nicely into the 1.75x.120 tubing although 2x.188 tubing would work alot better.
Also in each kit 2 of the procomp ones come for 9/16 bolts and 2 for 1/2 bolts
Originally Posted by afroman006Originally Posted by afroman006
Thanks guys, my ADD was hittin hard yesterday.
Creighton, you used the 1.75 on the rear correct? I wouldn't mind using the heavier tube, but I am going to be on a super tight schedule this time and I know I have plenty of the 1.75. With this one being on the front and going to have to be so short, the heavier tube would be the way to go, I just need to find a few feet of it. Anybody have any handy they want to get rid of?
yeah the rear is 1.75 for the bushings and upper part of the ladder bar and steering tube for the lower bar so you won't bend it like cook did
Originally Posted by afroman006Originally Posted by afroman006
Ok, I am pretty sure I have a little bit of that left. If not, I know I can get some good tube pretty quick at a few of my suppliers.