Its no glove box, but I believe that it provides a much more important purpose
Its no glove box, but I believe that it provides a much more important purpose
92 YJ
04 F-150 4x4
11 F-250 4x4
It was $5 at the army supply place. Cut two big holes and some the old boat cupholders. The cooler fits perfectly there too.
92 YJ
04 F-150 4x4
11 F-250 4x4
hacked up rear bumper (temporary)
92 YJ
04 F-150 4x4
11 F-250 4x4
No pics, but Rusty put new exhaust on it today. Cut the cat out and replaced the delta 40 with a 40 series. It sounds better, but only a little bit louder, which is good.
Sky tie rod should go on this weekend.
IF when I put it in park, it sometimes tends to keep rolling, is that a problem external to the trans? It did it before the trans rebuild a few months ago and just noticed it after having to block the tires on the trailer when I was loading it today.
92 YJ
04 F-150 4x4
11 F-250 4x4
how far are we talking about? inches? feet?
Like, rolling down the street/trailer/trail. It won't ALWAYS hold. Sometimes it will hold fine. It almost seems like a linkage issue, not allowing the lever to fully engage park.
92 YJ
04 F-150 4x4
11 F-250 4x4
Id check the linkage. or it may be a spawl in the transmission that holds the linkage to the park position.
floor shifter baby!!!
Originally Posted by Fredo
My bitch better have my money...
Through rain, sleet, or snow...
My whore better have my money...
Not half, not some, but all my cash...
'Cause if she don't,
I'm gonna put my foot in her ass.
if it worked fine before I would bet on the linkage needing to be adjusted. Otherwise the rebuilder could have left out part of the parking gear mechanism. If its not the linkage you could probably just drop the t-case and get to what you need with the trans in the truck
Tunes are now better than they have ever been. I ditched the old cheesy Pioneer for a new cheesy Pioneer. This one has and aux. output so Bronco is now iPod compatible
Big "vendor" thumbs up for Audio Video. Brandon always gets me what I need for a great price. Really nice guy and he knows his car audio.
92 YJ
04 F-150 4x4
11 F-250 4x4
I got the new tie rod today. I think it is 1.25". When I mount it ontop of the knuckle, there is maybe 1/8" clearance between it and the spring. Roll with it?I dunno, I should probably just mount it under.
And just to be sure, it should go.....bolt head, misalignment bushing, heim, misalignment busing, knuckle, washer, nut.?????
how ghetto is it that I will now be running heims on the tie rod and TREs on the drag link?
92 YJ
04 F-150 4x4
11 F-250 4x4
doesn't sound ghetto to me just creative
Jonathan Tate
361.676.6466
2010 Dodge Ram 2500 4x4 6.7 MegaCab
2004 Jeep TJ
1992 Jeep YJ
2008 Jeep JKU
2013 Ford Explorer Sport (mama's go fast car)
You may be able to chunk the misalignment bushings to get some more clearance. Just bolt it on without them and turn the wheels to see if it hits. A tie rod doesn't get much misalignment. I'm not sure if I have them on the tie rod on jeep or not.
yes.
not ghetto. tre's have more misalignment capability. this is a pretty common combo i think.
I think I finally figured out what the loud clacking sound from the motor was. I think I am running the wrong crank pulley, which causes the belt to jump back and forth, which pisses off the tensioner, which causes something inside it to pop.
The radiator is toast from the several minivan collisions and I haven't torn into the hubs yet to see what the problem was. I actually had to winch the Warn hub out of the axle to be able to spin the tire and get it on the trailer.
I will probably have to clean for several days before I can even start repairing various items.
The PVC speaker "boxes" worked great. The Ipod got a little muddy, but that was the only issue.
Still down for Clayton, hopefully with have bumpers.
92 YJ
04 F-150 4x4
11 F-250 4x4
Posting Permissions
Reply With Quote