try 123 years old. But I think this wiring is probably more like 60. I'm with you though...doubt there will be anything in the box other than what I can see on the outside, so I guess that means me running a new ground over to the panel. Some guy on some other forum says he has an extension cord like I was planning to make, and that it is okay for temporary uses, but I don't really want to burn my house down so I am thinking I might just do it the right way.
Cant the conduit be used as a ground if its metal?
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
That does present a small logistical issue.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
if there is conduit you can use it as a ground and then jump it again at the panel. if the panel is grounded it will be fine.
take a pic.
Does anyone know how to remove the oil cooler lines from a 98 K3500 with a 7.4? It looks like a push-lock type fitting but it is larger and plastic. I have a set of the removers but they dont seem to be working. I need to remove the hoses so I can get to the pan bolts to remove them.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
i think there is a clip that you pull out where the slots on the side of the fitting is
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
is a t5/231 from a s10 a bolt and go swap for a ax5/231 in a jeep YJ? if not, whats involved. i cant find a damn thing.