I need an NP205 for a chevy, not in a big hurry, but seeing if anyone has one.
I need an NP205 for a chevy, not in a big hurry, but seeing if anyone has one.
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
You need the whole thing or just the tail housing? If just the tail housing I believe you can also use one from a Ford 205...that's what I swapped on to my old 205. That could open up your options when looking.
Last edited by mudtoy67; 03-08-2009 at 04:52 PM.
BDR
Northwest Fab has a billet housing and cover kit for a 205. If a ford one will work I have one at my shop I'll sell ya cheap.
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
if you are looking for the whole thing what spline count will you need?
I will need to research the spline count and if Ford parts will work. It is mated to an auto TH350, but I think they made 2 spline counts for that. Right?
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
This website appears to be bad arse:
http://okcnetworks.com/bronco/205/np1.htm
-Karl
2006 Chevy K3500 4X4 - No J.B. Weld on it yet!
1982 thru 94 F-Series "The Klogger" AKA Transport on the road, on the trail, or on the trailer!
1965 Chevelle
1975 Corvette
if its mated to a th350 then it is a 27 spline 205 and are much harder to find
i know that any chevy would work, i was just saying that if he wanted to find a whole replacement case
I have a racetrack style 10 spline at the house if you need one that bad.