I'm going to start building a cart tonight for the new welder. What do you wish was on your's?
I'm going to start building a cart tonight for the new welder. What do you wish was on your's?
1988 Blazer...RIP
better casters.... it seems to be a common problem with me
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
and all 4 spin not just 2
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
I want an old overhead projector cart. those things are beef.
add dedicated storage, so everything is out of the way all the time and not cluttering up the top tray like mine.
...
I wish my welder had side tray because I always and keeping tools on top
Originally Posted by afroman006Originally Posted by afroman006
hooks to hang **** on, place to put grinder, also storage to keep grinding disc and other metal working equip.
Ryan Clarke
(214)695-7901
Put a 4 way 110v plug on it and wire it to the welder lead so you can just plug your grinders and such in right there. You more than likely will not be using the welder and the grinders at the same time anyways.
Pneumatic swilvel tires so that it can go'off-road' around the driveway if needed.
I have a long lead on my welder right now and have thought about using it to wire the plugs on the cart, then just put the old cord back on and have a 220v plug on it too so the welder could be transported if necessary.
What's too bulky? I am talking about the power cord, not the welding lead.
thats what i am talking about. I hate those with the plug right at the welder with the extension cord box at the end. You have it set up just right
well he was going to get started but i ended up going over there to bend up the front hoop for my cage. so i dont think he got much done after i left
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
his machine should already have 2 110 outlets on the front, but a good idea non the less
Originally Posted by afroman006Originally Posted by afroman006