Ford 9 inch

[Busa]

This is what my rear 9 cost me.

Stock 9 housing $50
Strange 9 case $240 P#N2206
Pinion Support $90
1350 Pinion Yoke $90
5.13 gears $170
Detroit $550
Install Kit $150
About $150 to have the gears set up
35 spline shafts $425
Then whatever brakes you will run.

If you go with a Spider housing the you can add 500 for the hosing and about 100 for new end from Currie. If you get the right ends the 8.8 brake will bolt right up. So about 2500 and you have a great axle for years to come.

You may have said, but why do yo wont to go 57 wms to wms. I made mine at 65 and had to put wheel spacer on the front to get a turning radius with 40's. With the steering setup i have i have 41dg of steering.