So after going to K Rocks this weekend for TCC, and seeing some other rigs, I've gotten some ideas for this rig. I really like the cage that John Brown has on his bronco that connects to an exo cage for the front sheet metal and a small stinger on the front.
But for this summer, here's the list:
Tires from sharpe
Get it running
Remove bed
shorten frame to rear leaf spring mounts
Some sort of crossmember between frame rails at end of rear leaf springs
wire lights back up w/ autozone LED's
Club Suggestions:
Fender clearancing
A better name
Cooler tie down points
Sliders
2 ugly chicks
Recovery points
Cup holders
any other ideas for cheap stuff I can do?
Last edited by Sparling; 04-12-2010 at 04:35 PM.
'91 Bronco 351w, ZF5, D44 TTB, 9" rear swap with disk brakes, 37" toyos, method wheels, mastercraft seats, A/C and heat
sawzall front fenders
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
Come up with a better name
On the 8th day god created the Super Swamper TSL and said "go forth and kick ass"
tie down points for a cooler. There is **** everywhere in the back of my rover.
...
scrap the bed, rear frame sections, front tow bar/bumper thing and front fender scraps. Scrap prices are good right now this should get you 50-100 bucks. Take that cash and build some sliders.
Last edited by 85cj7; 04-12-2010 at 03:29 PM.
cup holders
Red 81 CJ5, 35's, 4.10 and detroit, 4 to 1 dana 300, tbi efi, flat belly, cage, chromos and auzzie in front... sometimes runs. body damage to come
names are overrated. cut front fenders to clear tires.
I wouldn't remove the bed all together, and if you do, built some sort of a flat bed.
flatbed/toolbox. weld the diffs.
Seth Stewart '04
2000 Suburban DD
1995 F150 SAS - Needs more work to sell
1998 GMC pickup - sold
2003 Yukon XL - wrecked/motor donor
1975 Scout - TBD
1976 Scout - parts truck
1972 IH 1310 dually - TBD
196? Scout 800 - 302 roller